<?xml version="1.0" encoding="UTF-8" ?><!-- generator=Zoho Sites --><rss version="2.0" xmlns:atom="http://www.w3.org/2005/Atom" xmlns:content="http://purl.org/rss/1.0/modules/content/"><channel><atom:link href="https://www.btc-ksa.com/Knowledge-Hub/tag/bearing-currents/feed" rel="self" type="application/rss+xml"/><title>BTGC - Knowledge Hub #bearing currents</title><description>BTGC - Knowledge Hub #bearing currents</description><link>https://www.btc-ksa.com/Knowledge-Hub/tag/bearing-currents</link><lastBuildDate>Wed, 18 Nov 2026 05:36:35 -0800</lastBuildDate><generator>http://zoho.com/sites/</generator><item><title><![CDATA[Shaft Grounding Brushes: Protecting Bearings from Shaft Currents]]></title><link>https://www.btc-ksa.com/Knowledge-Hub/post/shaft-grounding-brushes-bearing-currents-saudi-arabia</link><description><![CDATA[<img align="left" hspace="5" src="https://www.btc-ksa.com/knowledge-hub/best-carbon-brushes-holders-slip-ring-parts.webp"/>Why shaft currents damage motor and generator bearings, and how grounding brushes, insulated bearings and good earthing prevent fluting. Best Carbon, BTGC.]]></description><content:encoded><![CDATA[<div class="zpcontent-container blogpost-container "><div data-element-id="elm_GgC8WItZRMatjrszOBR-oQ" data-element-type="section" class="zpsection "><style type="text/css"></style><div class="zpcontainer-fluid zpcontainer"><div data-element-id="elm_b9Xbh8KKR02N08UfQjyG-g" data-element-type="row" class="zprow zprow-container zpalign-items- zpjustify-content- " data-equal-column=""><style type="text/css"></style><div data-element-id="elm_9_nZuw-CTf-Ya-LBIlBxHg" data-element-type="column" class="zpelem-col zpcol-12 zpcol-md-12 zpcol-sm-12 zpalign-self- "><style type="text/css"></style><div data-element-id="elm_PiZ9ilM8C0hmFTFWIIGqmw" data-element-type="codeSnippet" class="zpelement zpelem-codesnippet "><div class="zpsnippet-container"><p class="btgc-byline" style="margin:0 0 14px;color:rgb(74, 85, 104);font-size:14px;">By <strong>BTGC Engineering Team</strong> · Business Tribune Global Company, Saudi Arabia</p><blockquote style="background:rgb(238, 244, 251);border-left:4px solid rgb(21, 101, 192);padding:14px 18px;margin:0 0 18px;border-radius:6px;"><p><strong>In short:</strong> voltage on a motor or generator shaft can discharge through the bearings, burning tiny pits in the races and leaving the frosted or fluted pattern that ends in noise and failure. Variable speed drives, magnetic asymmetry and static build-up all cause it. A shaft grounding brush gives the current an easier path to earth, and insulated bearings block the path through the bearing. BTGC supplies Best Carbon grounding brushes and fits them at the Jubail service center.</p></blockquote><figure style="margin:24px 0;"><img loading="lazy" src="https://www.btc-ksa.com/knowledge-hub/best-carbon-brushes-holders-slip-ring-parts.webp" alt="Carbon brushes, holders and slip ring parts" style="max-width:100%;border-radius:10px;box-shadow:0 12px 30px rgba(0, 0, 0, 0.18);"></figure><p>Motors on VFDs, turbine generators and large fans in Saudi plants all need protection from shaft currents.</p><h2>Sources of shaft voltage</h2><table style="width:100%;border-collapse:collapse;margin:16px 0 24px;"><thead><tr><th style="text-align:left;padding:8px 10px;border-bottom:2px solid rgb(21, 101, 192);background:rgb(238, 244, 251);">Source</th><th style="text-align:left;padding:8px 10px;border-bottom:2px solid rgb(21, 101, 192);background:rgb(238, 244, 251);">Typical machines</th></tr></thead><tbody><tr><td style="padding:8px 10px;border-bottom:1px solid rgb(227, 232, 238);vertical-align:top;">Common-mode voltage from VFDs</td><td style="padding:8px 10px;border-bottom:1px solid rgb(227, 232, 238);vertical-align:top;">Motors on variable speed drives, especially larger and MV motors</td></tr><tr><td style="padding:8px 10px;border-bottom:1px solid rgb(227, 232, 238);vertical-align:top;">Magnetic asymmetry</td><td style="padding:8px 10px;border-bottom:1px solid rgb(227, 232, 238);vertical-align:top;">Large motors and generators, causing circulating currents</td></tr><tr><td style="padding:8px 10px;border-bottom:1px solid rgb(227, 232, 238);vertical-align:top;">Electrostatic charge</td><td style="padding:8px 10px;border-bottom:1px solid rgb(227, 232, 238);vertical-align:top;">Machines driving belts, fans or turbines in dry air</td></tr><tr><td style="padding:8px 10px;border-bottom:1px solid rgb(227, 232, 238);vertical-align:top;">Excitation systems</td><td style="padding:8px 10px;border-bottom:1px solid rgb(227, 232, 238);vertical-align:top;">Generators with static excitation</td></tr></tbody></table><h2>Protection methods</h2><ul><li><p>Shaft grounding brush on the drive end or non-drive end to drain current to the frame.</p></li><li><p>Insulated bearing or insulated housing at the opposite end to break the circulating path.</p></li><li><p>Ceramic (hybrid) bearings in some motor designs.</p></li><li><p>Good earthing and symmetrical, shielded motor cables on VFD drives; see <a href="https://www.btc-ksa.com/Knowledge-Hub/post/vfd-bearing-currents-mv-motors-saudi-arabia">VFD bearing currents in MV motors</a>.</p></li></ul><figure style="margin:24px 0;"><img loading="lazy" src="https://www.btc-ksa.com/knowledge-hub/weg-high-voltage-motor-w60.webp" alt="High voltage motor in a plant" style="max-width:100%;border-radius:10px;box-shadow:0 12px 30px rgba(0, 0, 0, 0.18);"></figure><h2>Keeping grounding brushes working</h2><ul><li><p>Choose a brush grade suited to the shaft speed and current; see <a href="https://www.btc-ksa.com/Knowledge-Hub/post/carbon-brush-grades-selection-saudi-arabia">carbon brush grades</a>.</p></li><li><p>Check brush length, spring pressure and contact surface at each inspection.</p></li><li><p>Keep the contact track clean and free of oil and dust.</p></li><li><p>Measure shaft voltage periodically to confirm the system works.</p></li><li><p>Check bearing insulation resistance during motor overhauls.</p></li></ul><h2>Best Carbon from BTGC</h2><p>Best Carbon supplies carbon brushes, brush holders, slip rings and grounding devices. BTGC supplies <a href="https://www.btc-ksa.com/Knowledge-Hub/post/best-carbon-saudi-arabia">Best Carbon in Saudi Arabia</a> and fits these parts during motor and generator service at the <a href="https://www.btc-ksa.com/btgc-jubail-service-center">BTGC Jubail service center</a>. See also the <a href="https://www.btc-ksa.com/electrical-power-systems-saudi-arabia">electrical and power systems</a> page.</p><h2>Questions buyers ask</h2><p><strong>How do I know bearing currents are the problem?</strong> Fluting or frosted marks on the races and a rise in bearing noise, often on VFD-fed motors.</p><p><strong>Is one grounding brush enough?</strong> Often with an insulated bearing at the other end; the design depends on the machine.</p><p><strong>Can BTGC retrofit grounding brushes?</strong> Yes, during motor service at the Jubail workshop.</p><h2>Contact the BTGC power division</h2><p>Email power@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. <a href="https://www.btc-ksa.com/contact#quote">Request a quote</a>.</p></div>
</div></div></div></div></div></div> ]]></content:encoded><pubDate>Wed, 18 Nov 2026 14:22:50 +0300</pubDate></item><item><title><![CDATA[Bearing Currents in VFD-Driven Motors: Causes and Cures]]></title><link>https://www.btc-ksa.com/Knowledge-Hub/post/vfd-bearing-currents-mv-motors-saudi-arabia</link><description><![CDATA[<img align="left" hspace="5" src="https://www.btc-ksa.com/knowledge-hub/weg-high-voltage-motor-w60.webp"/>Why motors on variable frequency drives suffer bearing fluting, and how insulated bearings, shaft grounding and cabling prevent it. WEG MV motors from BTGC.]]></description><content:encoded><![CDATA[<div class="zpcontent-container blogpost-container "><div data-element-id="elm_xn73p17mTBSQqsMvkZawEA" data-element-type="section" class="zpsection "><style type="text/css"></style><div class="zpcontainer-fluid zpcontainer"><div data-element-id="elm_-Zs6XTK8RZS1B3sbQ5Zsjw" data-element-type="row" class="zprow zprow-container zpalign-items- zpjustify-content- " data-equal-column=""><style type="text/css"></style><div data-element-id="elm_hge1fO5HSeGOxQ6oWjWC3Q" data-element-type="column" class="zpelem-col zpcol-12 zpcol-md-12 zpcol-sm-12 zpalign-self- "><style type="text/css"></style><div data-element-id="elm_FyDTQb1Tm_3w-5n7upoA2Q" data-element-type="codeSnippet" class="zpelement zpelem-codesnippet "><div class="zpsnippet-container"><p class="btgc-byline" style="margin:0 0 14px;color:rgb(74, 85, 104);font-size:14px;">By <strong>BTGC Engineering Team</strong> · Business Tribune Global Company, Saudi Arabia</p><blockquote style="background:rgb(238, 244, 251);border-left:4px solid rgb(21, 101, 192);padding:14px 18px;margin:0 0 18px;border-radius:6px;"><p><strong>In short:</strong> variable frequency drives save energy and soften starts, but the fast switching of the inverter puts a common-mode voltage on the motor that can discharge through the bearings. The result is electrical erosion: frosted races, washboard fluting, noisy bearings and early failure, sometimes within months. The cure is a system design that gives the current a better path: insulated bearings, shaft grounding, symmetrical shielded cable and proper bonding. BTGC supplies WEG medium and high voltage motors and drives configured for VFD duty and repairs damaged motors at its WEG approved service center in Jubail.</p></blockquote><figure style="margin:24px 0;"><img loading="lazy" src="https://www.btc-ksa.com/knowledge-hub/weg-high-voltage-motor-w60.webp" alt="WEG industrial electric motor" style="max-width:100%;border-radius:10px;box-shadow:0 12px 30px rgba(0, 0, 0, 0.18);"></figure><p>A typical story: a pump or fan motor is converted from direct-on-line starting to a VFD to save energy. A year later the bearings are noisy, vibration analysis shows bearing defect frequencies, and the removed bearing has a grey, frosted race with evenly spaced ridges like a washboard. The grease is dark. The bearing did not fail from load or lubrication; it was machined by millions of tiny electrical discharges.</p><h2>Where the current comes from</h2><p>A PWM inverter switches very fast, and the sum of the three phase voltages at the motor is no longer zero as it is on a sine-wave supply. This common-mode voltage couples through the motor's internal capacitances onto the rotor and shaft. When the voltage across the bearing's oil film exceeds its breakdown level, it discharges through the rolling elements. IEC TS 60034-25 describes the mechanisms and the measures that limit them.</p><table style="width:100%;border-collapse:collapse;margin:16px 0 24px;"><thead><tr><th style="text-align:left;padding:8px 10px;border-bottom:2px solid rgb(21, 101, 192);background:rgb(238, 244, 251);">Type of bearing current</th><th style="text-align:left;padding:8px 10px;border-bottom:2px solid rgb(21, 101, 192);background:rgb(238, 244, 251);">Typical motors</th><th style="text-align:left;padding:8px 10px;border-bottom:2px solid rgb(21, 101, 192);background:rgb(238, 244, 251);">Mechanism</th></tr></thead><tbody><tr><td style="padding:8px 10px;border-bottom:1px solid rgb(227, 232, 238);vertical-align:top;">Capacitive discharge (EDM)</td><td style="padding:8px 10px;border-bottom:1px solid rgb(227, 232, 238);vertical-align:top;">Small and medium motors</td><td style="padding:8px 10px;border-bottom:1px solid rgb(227, 232, 238);vertical-align:top;">Shaft voltage builds up and discharges through the oil film in short sparks</td></tr><tr><td style="padding:8px 10px;border-bottom:1px solid rgb(227, 232, 238);vertical-align:top;">Circulating high-frequency current</td><td style="padding:8px 10px;border-bottom:1px solid rgb(227, 232, 238);vertical-align:top;">Larger motors, roughly 100 kW and above</td><td style="padding:8px 10px;border-bottom:1px solid rgb(227, 232, 238);vertical-align:top;">Common-mode current in the stator induces a voltage along the shaft, driving current through one bearing, the frame and the other bearing</td></tr><tr><td style="padding:8px 10px;border-bottom:1px solid rgb(227, 232, 238);vertical-align:top;">Rotor ground current</td><td style="padding:8px 10px;border-bottom:1px solid rgb(227, 232, 238);vertical-align:top;">Installations with poor frame earthing or bonding</td><td style="padding:8px 10px;border-bottom:1px solid rgb(227, 232, 238);vertical-align:top;">Current finds its way to earth through the bearings and the driven machine, often damaging pump or gearbox bearings too</td></tr></tbody></table><h2>Signs of electrical bearing damage</h2><ul><li><p>Frosted or matt grey raceways, often with fluting: evenly spaced ridges across the race.</p></li><li><p>Micro-craters visible under magnification on balls or rollers.</p></li><li><p>Grease darkened by metal particles and burnt oil.</p></li><li><p>Rising high-frequency vibration and noise at bearing defect frequencies.</p></li><li><p>Damage in the driven equipment's bearings as well as the motor's.</p></li></ul><figure style="margin:24px 0;"><img loading="lazy" src="https://www.btc-ksa.com/knowledge-hub/electric-motor-stator-rewind-btgc-jubail-workshop.webp" alt="Large electric motor stator in the BTGC motor workshop in Jubail" style="max-width:100%;border-radius:10px;box-shadow:0 12px 30px rgba(0, 0, 0, 0.18);"></figure><h2>How to prevent it</h2><table style="width:100%;border-collapse:collapse;margin:16px 0 24px;"><thead><tr><th style="text-align:left;padding:8px 10px;border-bottom:2px solid rgb(21, 101, 192);background:rgb(238, 244, 251);">Measure</th><th style="text-align:left;padding:8px 10px;border-bottom:2px solid rgb(21, 101, 192);background:rgb(238, 244, 251);">What it does</th></tr></thead><tbody><tr><td style="padding:8px 10px;border-bottom:1px solid rgb(227, 232, 238);vertical-align:top;">Insulated bearing (usually non-drive end) or ceramic rolling elements</td><td style="padding:8px 10px;border-bottom:1px solid rgb(227, 232, 238);vertical-align:top;">Breaks the circulating current loop through the bearings</td></tr><tr><td style="padding:8px 10px;border-bottom:1px solid rgb(227, 232, 238);vertical-align:top;">Shaft grounding brush or ring at the drive end</td><td style="padding:8px 10px;border-bottom:1px solid rgb(227, 232, 238);vertical-align:top;">Gives shaft voltage a low-impedance path to the frame instead of through the bearing</td></tr><tr><td style="padding:8px 10px;border-bottom:1px solid rgb(227, 232, 238);vertical-align:top;">Symmetrical shielded motor cable with 360-degree gland termination</td><td style="padding:8px 10px;border-bottom:1px solid rgb(227, 232, 238);vertical-align:top;">Returns common-mode current to the drive along the shield, not through the motor and driven machine</td></tr><tr><td style="padding:8px 10px;border-bottom:1px solid rgb(227, 232, 238);vertical-align:top;">High-frequency bonding between motor frame, driven machine and drive</td><td style="padding:8px 10px;border-bottom:1px solid rgb(227, 232, 238);vertical-align:top;">Keeps frame and driven machine at the same potential</td></tr><tr><td style="padding:8px 10px;border-bottom:1px solid rgb(227, 232, 238);vertical-align:top;">Insulated coupling</td><td style="padding:8px 10px;border-bottom:1px solid rgb(227, 232, 238);vertical-align:top;">Stops current passing into the driven machine's bearings</td></tr><tr><td style="padding:8px 10px;border-bottom:1px solid rgb(227, 232, 238);vertical-align:top;">Common-mode or output filters at the drive</td><td style="padding:8px 10px;border-bottom:1px solid rgb(227, 232, 238);vertical-align:top;">Reduce the common-mode voltage and the rate of voltage rise at the source</td></tr></tbody></table><p>No single item works on every installation. Large MV motors on drives usually combine an insulated non-drive end bearing with a shaft grounding device and correct cabling, and the winding insulation must also be rated for the voltage stresses of inverter duty, as covered in <a href="https://www.btc-ksa.com/Knowledge-Hub/post/preventing-stator-winding-failure-duraguard-vpi-insulation-saudi-arabia">preventing stator winding failure</a>.</p><h2>When retrofitting a VFD to an existing motor</h2><ul><li><p>Check with the motor maker that the insulation system suits inverter duty.</p></li><li><p>Fit an insulated non-drive end bearing at the next overhaul, and a shaft grounding device at the drive end.</p></li><li><p>Review the cable type and the earthing and bonding scheme, not just the motor.</p></li><li><p>Measure shaft voltage after commissioning and trend bearing vibration in the first months.</p></li></ul><h2>WEG motors and drives from BTGC</h2><p>BTGC is the <a href="https://www.btc-ksa.com/weg">WEG partner in Saudi Arabia</a> for medium and high voltage motors and MV drives, and new WEG motors for VFD duty can be specified with insulated bearings and shaft grounding. The <a href="https://www.btc-ksa.com/btgc-jubail-service-center">BTGC service center in Jubail</a>, a WEG approved service center, inspects and repairs motors with electrical bearing damage and fits insulated bearings during overhaul. See also <a href="https://www.btc-ksa.com/Knowledge-Hub/post/converting-mv-soft-starters-weg-mvw3000-vfd-saudi-arabia">converting MV soft starters to VFDs</a> and <a href="https://www.btc-ksa.com/Knowledge-Hub/post/hv-motor-rewind-or-replace-saudi-arabia">rewind or replace decisions</a>.</p><h2>Questions buyers ask</h2><p><strong>Do all motors on VFDs need insulated bearings?</strong> Not all. Smaller motors may only need correct cabling and bonding; larger motors on drives usually need an insulated bearing and a shaft grounding device. BTGC reviews the installation.</p><p><strong>Can fluting be repaired?</strong> The damaged bearing must be replaced, and the cause must be fixed, or the new bearing will fail the same way.</p><p><strong>Can shaft voltage be measured on site?</strong> Yes, with an oscilloscope and a shaft voltage probe while the motor runs on the drive; the result shows which measures are needed.</p><h2>Contact the BTGC power division</h2><p>Email power@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. <a href="https://www.btc-ksa.com/contact#quote">Request a quote</a>.</p></div>
</div></div></div></div></div></div> ]]></content:encoded><pubDate>Mon, 16 Nov 2026 09:54:31 +0300</pubDate></item></channel></rss>