In short: on a high-cycle port crane the wire rope is the most frequently replaced part, and the sheave it runs over decides how long it lasts. A machined, welded sheave is lighter than cast iron, lowers inertia on the rope and wears evenly. BTGC supplies Gosan sheaves, hook blocks and couplings for ports, steel mills and mega-projects.

Saudi ports at Jubail, Ras Al Khair, Dammam and Yanbu handle containers, phosphate, fertilizer and steel around the clock. Each crane cycle runs the hoist rope over several sheaves; a container crane can make a thousand cycles a day. Rope changes are planned downtime, and an early rope change is lost throughput.

What kills wire rope

• Bending fatigue at each sheave; a sheave too small or a groove with the wrong profile bends the wires too sharply.

• Inertia loads when a heavy cast sheave accelerates and brakes with every hoist; the rope takes the shock.

• Groove wear: a worn groove pinches or flattens the rope.

• Dust and salt in a port atmosphere, which grind the rope in the groove.

Why a welded, machined sheave lasts longer

Laminated hooks for melt shops

In a steel melt shop the ladle crane carries molten metal over people. A hook forged from a single piece can fail without warning if a crack runs through it. A laminated hook is built from riveted steel plates; if one plate cracks, the others carry the load. The BTGC catalogue describes this as a mandatory safety standard for smelters and foundries.

Gosan from BTGC

Gosan of Bilbao, Spain, has designed and manufactured lifting components since 1971 and makes more than 35,000 sheaves a year. The range BTGC supplies in the Kingdom covers:

• Machined and welded sheaves for wire rope transmission

• Hook blocks for port cranes, ladle cranes and mobile cranes

• Laminated ladle hooks for smelters and foundries

• Barrel couplings for hoisting drums and industrial crane wheels

Applications in the BTGC catalogue are port logistics, overhead cranes in steel mills, mega-projects and foundries. See our page for Gosan in Saudi Arabia and the full machinery and material handling offer.

Rope lubrication completes the picture

BTGC also supplies Bel-Ray and Royal Purple wire rope lubricants, penetrating oils that protect the rope core from the salt air of the Gulf and the Red Sea. Sheave, hook block and rope lubricant can be sourced as one crane maintenance package.

BTGC support in Dammam, Jubail and Yanbu

BTGC supports ports, steel mills and construction contractors from three branches. For a quotation send the rope diameter and construction, the sheave diameter and groove profile, the load and duty class, and a drawing or photo of the existing component.

Questions buyers ask

Can Gosan match an existing sheave? Yes, sheaves are made to the drawing or to measurements of the old part.

What standards apply? FEM and DIN for crane components; the catalogue lists FEM 1001 and DIN 15020 for blocks.

Lead time for a hook block? Depends on capacity and customisation; BTGC verifies long-lead items before a crane outage.

Contact BTGC

Email info@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.