Bellows-Seal Valves for Heat Transfer Oil and Toxic Fluids

16.11.26 09:03 AM

In short: a bellows-seal valve replaces the leaking stem packing with a welded metal bellows, so the fluid cannot escape along the stem. That matters for hot heat transfer oil, which is a fire risk, and for toxic or expensive fluids. BTGC supplies KSB bellows-seal globe and gate valves for Saudi petrochemical, chemical and utility plants.

Industrial globe and gate valves in a plant pipe rack

Heat transfer oil systems run at 250 to 350 °C in polymer, chemical and resin plants. A small packing leak at that temperature soaks insulation, and oil-soaked insulation can self-ignite. Toxic services such as chlorine, ammonia or hydrogen sulphide raise a different risk: any stem leak is a personnel exposure. In both cases the most reliable fix is to remove the dynamic stem seal from the leak path altogether.

How a bellows seal works

A thin multi-ply metal bellows is welded to the stem at one end and to the bonnet at the other. As the valve strokes, the bellows flexes; the fluid stays inside it and never reaches the packing. A back-up packing above the bellows acts as a second barrier. The bellows has a rated cycle life, so it is selected for the number of operations the valve will see.

ServiceWhy bellows seal
Heat transfer oilPrevents oil-soaked insulation and fire risk
Steam and condensateEnds constant gland leaks and maintenance
Toxic and lethal fluidsRemoves stem leakage as an exposure route
Vacuum serviceStops air ingress along the stem
Expensive solventsStops product losses
Valve testing at the BTGC service center in Jubail

Specifying a bellows-seal valve

  • Fluid, design pressure and temperature, and the number of operations per year (for bellows cycle life).

  • Body material (cast steel, stainless or alloy) and end connections.

  • Shut-off class and whether the valve is for isolation or throttling.

  • Back-up packing and leak detection port options.

KSB from BTGC

KSB supplies bellows-seal globe valves, gate valves and butterfly valves for industry and power plants alongside its pump range. BTGC is a KSB partner in Saudi Arabia for industrial valves. See also butterfly valves for cooling water and the petrochemicals sector page.

Questions buyers ask

How long does a bellows last? It is rated for a number of full strokes; isolation valves rarely reach it, but frequently operated valves should be selected with margin.

Can existing valves be converted to bellows seal? Usually not; the bonnet and stem are different. Replacement with a bellows-seal valve of the same face-to-face is the normal route.

Can bellows-seal valves throttle? Yes, globe-pattern bellows valves can be supplied with regulating plugs.

Contact the BTGC valve team

Email valves@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.