In short: fire-safe certification proves a valve still seals and holds pressure after being engulfed in a fire, and fugitive emission certification proves its stem seal leaks below a stated limit over thousands of cycles. Saudi oil, gas and petrochemical specifications call for both. BTGC supplies Crane ChemPharma & Energy valves certified to API 607 and ISO 15848, with local assembly support in Dammam.

Two tests appear in almost every Saudi valve data sheet for hydrocarbon service, and they are often confused. One is about what happens in a fire; the other is about what leaks every day. A valve can pass one and not the other, so buyers need to ask for both certificates by name.
Fire-safe testing
API 607 (for quarter-turn valves with soft seats) and API 6FA (for API 6A and 6D valves) burn the valve at 750 to 1000 °C for 30 minutes with the valve closed and pressurised, then cool it with water and operate it. The test measures leakage through the seat and to the outside during and after the burn. Soft-seated ball and plug valves pass by having a secondary metal-to-metal seat and graphite seals that take over when the PTFE burns away.
Fugitive emission testing
| Standard | What it covers |
|---|---|
| ISO 15848-1 | Type test of stem seal leakage at temperature over mechanical cycles; tightness classes AH, BH, CH (helium) and endurance classes CO1 to CO3 |
| ISO 15848-2 | Production acceptance test on valves from a qualified type |
| API 622 / API 624 / API 641 | US standards for packing, rising stem valves and quarter-turn valves |
Specifications often name a tightness class and an endurance class together, for example ISO 15848-1 BH CO1. The certificate must cover the valve type, size range and pressure class supplied, not just a similar valve.

What to check on the data sheet
Fire-safe standard and the certificate covering the exact design and size range.
ISO 15848-1 tightness and endurance class, or API 624/641 where specified.
Packing type (graphite, PTFE) and live-loading.
Anti-static device and blow-out-proof stem for ball and plug valves.
Crane from BTGC
Crane ChemPharma & Energy brings together Xomox, Saunders, Pacific Valves, Krombach and Crane process valves. BTGC is a Crane partner in Saudi Arabia. See the Xomox page, the article on sleeved plug and diaphragm valves and the oil and gas sector page.
Questions buyers ask
Is fire-safe the same as fire-tested? Buyers use the terms loosely; what matters is the certificate to a named standard such as API 607 or API 6FA.
Can a repaired valve keep its emission class? Only if repaired with the original qualified sealing parts and procedure; BTGC uses genuine parts at the Jubail service center.
Do PTFE-sleeved plug valves meet ISO 15848? Specific Xomox designs are qualified; ask for the certificate for the size and class needed.
Contact the BTGC valve team
Email valves@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.