Absolute or Incremental Encoders: Choosing Position Feedback for Cranes, Mills and Drives

17.11.26 10:31 AM

In short: encoders tell a drive or controller where a shaft or carriage is and how fast it moves. Incremental encoders send pulses and count movement from a reference, so they lose position on power loss. Absolute encoders give a unique position value at all times, even after a power cut, which is why they are preferred for cranes, hoists, gates, stackers and mill positioning. Interface, mechanical mounting and environmental protection matter as much as resolution. BTGC supplies TR Electronic rotary and linear encoders.

TR Electronic rotary and linear encoders

Ports, steel and aluminium plants, cement works and water infrastructure in the Kingdom use encoders on cranes, roll gaps, conveyors, lock gates and valve actuators. Feedback faults stop production and can create safety risks if a crane or machine loses its position.

Main differences

FeatureIncrementalAbsolute
OutputPulses (A, B, index)Unique position value
After power lossNeeds homing to a referenceKnows position immediately
Multi-turn trackingCounted in the controllerBuilt into the encoder (multi-turn)
Typical useSpeed feedback for motorsPositioning of hoists, gates, trolleys and roll gaps
InterfacesTTL, HTL, sin/cosSSI, PROFIBUS, PROFINET, EtherCAT, CANopen, analogue

Selection points

  • Resolution and accuracy for the task, and multi-turn range for long travels.

  • Interface matched to the drive or PLC; fieldbus or industrial Ethernet for long cable runs.

  • Protection: IP65 to IP67 or higher, heavy-duty housings, and wide temperature range for outdoor cranes in Saudi summers.

  • Shaft or hollow-shaft mounting with a suitable coupling or torque arm to avoid bearing loads.

  • Functional safety rating where the encoder is part of a safety function, such as hoist overspeed or limit monitoring.

  • Explosion-protected versions for hazardous areas.

Crane hook block and wire rope

Avoiding feedback faults

  • Use shielded cables with correct grounding, and keep them away from motor power cables.

  • Check couplings and torque arms; misalignment destroys encoder bearings quickly.

  • Protect from water jets, dust and direct sun where possible.

  • Keep spare encoders configured for critical machines, with parameter backups.

  • Trend encoder diagnostics where the interface supports it.

TR Electronic from BTGC

TR Electronic of Germany makes rotary and linear encoders, absolute positioning systems and motion control products for heavy industry. BTGC is the TR Electronic partner in Saudi Arabia. See also crane duty classification, the machinery handling page and the metal sector page.

Questions buyers ask

Can an absolute encoder replace an incremental one? Often yes, if the drive or PLC supports the absolute interface; otherwise an encoder with both outputs can be used.

Why use a multi-turn encoder? It tracks many shaft revolutions without losing position, which suits hoists and long travels.

Does BTGC supply explosion-protected encoders? Yes, for hazardous areas in oil, gas and chemical plants.

Contact BTGC

Email info@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.