Busways or Cables for Low Voltage Power Distribution in Plants and Buildings

17.11.26 02:08 PM

In short: large low voltage currents, from transformers to main switchboards and from risers to floors and machines, can be carried by many parallel cables or by busbar trunking, also called busway. Busways deliver high current in a compact, factory-built system with tap-off points, and are quicker to install and change. Cables are more flexible for routes with many bends and for long, spread-out loads. The right choice depends on current, route, flexibility and heat. BTGC supplies Bahra Electric cables and busways.

Bahra Electric power cables

Factories, data centres, hospitals, airports, high-rise buildings and plant substations in the Kingdom carry thousands of amps at low voltage. Hot electrical rooms and long risers make heat and voltage drop key design factors.

Busways and cables compared

PointBuswayCables
High currentVery compact for thousands of ampsMany parallel cables, large trays
InstallationFast, prefabricated sectionsSlower pulling and termination
FlexibilityTap-off units can be added or movedChanges need new cables
RouteBest for straight runs and risersBetter for complex routes
Voltage drop and lossesLow impedance designs availableDepends on size and arrangement

Specification points

  • Rated current at the actual ambient temperature of the room or riser.

  • Short-circuit withstand matching the transformer and switchboard fault level.

  • Conductor material: copper or aluminium, and insulation system.

  • Ingress protection and fire rating, with fire barriers where busways pass through walls and floors.

  • Tap-off unit types and protection for the connected loads.

  • Design and type testing to IEC 61439-6 for busbar trunking systems.

Substation and power distribution equipment

Installation and maintenance

  • Support sections as specified and allow for thermal expansion on long runs.

  • Torque joint bolts to the maker's values and record them.

  • Check joints with thermography under load at regular intervals.

  • Keep risers clean and dry; dust and moisture reduce insulation.

  • Re-torque or inspect joints after any fault event.

Bahra Electric from BTGC

Bahra Electric is a Saudi manufacturer of medium and high voltage power cables, low voltage and control cables, and busways. BTGC is the Bahra Electric partner for plants and projects. See also medium voltage cables, compact substations and the electrical power systems page.

Questions buyers ask

Is a busway always cheaper than cables? Not always; it usually wins at high currents and straight routes, especially when installation time is counted.

Can tap-off units be added later? Yes, at the tap-off points provided along the busway.

Does BTGC supply locally made busways? Yes, Bahra Electric manufactures busways in the Kingdom.

Contact the BTGC power division

Email power@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.