In short: carbon steel loses strength and can graphitise at sustained high temperature, so hot hydrocarbon and steam lines use chrome-moly valve bodies such as ASTM A217 WC6 (1.25Cr-0.5Mo), WC9 (2.25Cr-1Mo) and C12A (9Cr-1Mo-V). More chromium gives better creep strength and better resistance to oxidation and sulphidation. Choosing the grade, trim and welding procedure correctly avoids cracks and leaks years later. BTGC supplies Pacific Valves gate, globe and check valves for refinery service.

Refinery heaters, hydroprocessing units and boiler steam systems in the Kingdom run at temperatures where material choice decides valve life.
Common cast grades
| Grade | Nominal chemistry | Typical service |
|---|---|---|
| WCB | Carbon steel | General service up to moderate temperatures |
| WC6 | 1.25Cr-0.5Mo | Steam and hot hydrocarbon lines |
| WC9 | 2.25Cr-1Mo | Higher temperature steam and hydrogen service |
| C5 | 5Cr-0.5Mo | Sulphidation resistance in hot crude and residue service |
| C12A | 9Cr-1Mo-V | Very high temperature steam in modern power and cogeneration plants |
What changes at high temperature
Creep: slow deformation under stress. Pressure ratings fall as temperature rises, so check the rating at design temperature; see ASME B16.34 pressure classes.
Graphitisation of carbon steel after long exposure above about 425 °C, which weakens welds and heat-affected zones.
Sulphidation in hot sulphur-bearing hydrocarbons, slowed by higher chromium.
Oxidation and galling of seats and trim, so hard-faced seats are usual.

Buying and installing
State the body material together with bolting, gaskets and trim in the data sheet.
Butt-weld end valves need matching filler metals, preheat and post-weld heat treatment per the piping code.
Ask for material certificates and positive material identification on alloy valves.
For large high-pressure steam valves consider pressure seal bonnets; see pressure seal valves.
Pacific Valves from BTGC
Pacific Valves, a Crane brand, makes cast steel gate, globe and check valves for refinery and petrochemical service, including alloy grades. BTGC supplies Pacific Valves in Saudi Arabia and supports testing at the Jubail service center. See also hard-faced gate valves and the oil and gas sector page.
Questions buyers ask
Can WC6 valves replace WC9? Only if the design pressure and temperature allow it; ratings and creep properties differ, so check the piping class.
Why does post-weld heat treatment matter? It lowers residual stress and hardness in chrome-moly welds and reduces the risk of cracking.
Does BTGC stock alloy valves? Availability varies, so BTGC quotes delivery per item and grade.
Contact the BTGC valve team
Email valves@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.