Decanter Centrifuges for Oily Sludge and Tank Bottoms

16.11.26 09:07 AM

In short: tank bottoms, API separator sludge and slop oil are a mix of oil, water and solids that is expensive to dispose of as it is. A decanter centrifuge, often with a three-phase design, separates it into recovered oil, clean water and dry solids, cutting waste volume and recovering product. BTGC supplies Elgin Separation Solutions centrifuges and support for Saudi refineries, terminals and waste contractors.

Elgin Separation Solutions centrifuges and separation equipment

Every crude and product tank collects sludge at the bottom, and every refinery wastewater plant collects oily sludge in its separators. Shipping it as hazardous waste costs money per tonne, and much of that tonnage is recoverable oil and water. Mechanical separation on site turns a disposal problem into a recovery job.

How the process works

  • Heating and conditioning. Sludge is heated and chemically treated to break emulsions.

  • Coarse screening. Rags, debris and large solids are removed so they do not damage the centrifuge.

  • Decanter centrifuge. A rotating bowl and scroll separate solids from liquid; a three-phase decanter also splits oil from water in the same machine.

  • Polishing. A disc stack centrifuge can clean the recovered oil further if it goes back to the refinery.

OutputWhere it goes
Recovered oilBack to slop tanks or refinery processing
WaterTo the wastewater treatment plant
Solids cakeReduced volume for treatment or disposal
Elgin vertical basket centrifuge

Choosing equipment

  • Sludge composition: oil, water and solids content, and solids particle size.

  • Throughput and whether the job is a one-off tank clean or continuous refinery duty.

  • Skid or trailer mounting for moving between tank farms.

  • Hazardous-area rating for the electrical equipment.

Elgin from BTGC

Elgin Separation Solutions builds decanter centrifuges, solids control and dewatering equipment for drilling, industrial and waste applications. BTGC is the Elgin partner in Saudi Arabia, with centrifuge overhaul support at the BTGC service center in Jubail. See also cuttings dryers and drilling fluid recovery and the oil and gas sector page.

Questions buyers ask

Can a mobile unit serve several tank farms? Yes; trailer-mounted packages move between sites.

Is a three-phase decanter always needed? Only when oil and water must be separated in one step; two-phase decanters with a downstream separator also work.

Do you overhaul centrifuges? BTGC supports scroll rebuilds, bearing replacement and balancing for centrifuge rotating assemblies.

Contact BTGC

Email info@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.