Gear Unit Refurbishment: Inspect, Repair or Replace

17.11.26 04:32 PM

In short: when a large gear unit fails or its condition deteriorates, the choice is to repair it, upgrade it during repair, or replace it. The right answer depends on the damage found, the availability of parts, lead times for new units, and whether the original design was adequate for the duty. A structured inspection and clear acceptance criteria make the decision faster and better. BTGC supplies SEISA gear units, gears and spare parts.

Industrial gears and bearings

Steel mills, cement plants, mines and process plants in the Kingdom run large gear units that can take months to replace. Repair decisions often have to be made quickly during an outage.

Inspection scope

ItemWhat to check
GearsTooth contact pattern, pitting, scuffing, cracks, wear
BearingsCondition, fit and clearance
ShaftsRun-out, cracks, keyway and seal area damage
HousingCracks, bore condition, alignment of bores
Lubrication systemPumps, filters, coolers and oil condition
Seals and breathersLeaks and contamination paths

Repair, upgrade or replace

  • Repair when damage is limited and parts are available within the outage window.

  • Upgrade during repair when the original rating was marginal: better materials, bearings, cooling or lubrication.

  • Replace when the housing is damaged, parts are obsolete, or repeated failures show the design is unsuitable.

  • Consider total cost: lost production, lead times and future reliability.

Heavy industrial drive

After repair

  • Check bearing clearances and gear backlash against specifications.

  • Run-in with the correct oil and monitor temperature and vibration.

  • Record baseline vibration and oil analysis for future trending; see gear unit condition monitoring.

  • Confirm alignment with motor and driven machine.

  • Update spare parts lists from the findings.

SEISA from BTGC

SEISA Gear, Ltd. of Japan makes gear units, high-speed gears, epicyclic gears and gear couplings. BTGC is the SEISA partner in Saudi Arabia. See also epicyclic gear units and the metal sector page.

Questions buyers ask

Can damaged gears be repaired? Light damage can sometimes be dressed; severe pitting or cracks usually mean replacement.

When is upgrading worthwhile? When failures were caused by an undersized or outdated design.

Does BTGC supply SEISA replacement gears? Yes, gears, bearings and complete units.

Contact BTGC

Email info@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.