Metal-Seated Ball Valves for Severe Service: Coatings and Selection

18.11.26 07:26 AM

In short: soft-seated ball valves seal well in clean service, but their polymer seats are damaged by heat, abrasive particles, slurries, catalyst and coke. Metal-seated ball valves use hard-coated balls and seats, often tungsten carbide or chromium carbide sprayed or overlaid on the metal, lapped together to seal. Chosen correctly, they last many times longer in severe service. BTGC supplies ECONTROL metal-seated ball valves for mining, oil and gas and process plants.

ECONTROL ball and globe valves

Mining and minerals plants, refineries, petrochemical units and power plants in the Kingdom have many services where standard ball valves leak within months.

Where metal seats are needed

ServiceProblem for soft seats
Slurries and mining leachAbrasive wear and particle embedding
Catalyst and powder handlingErosion and jamming
High temperature steam and gasPolymer seats soften or deform
Coking and heavy oilCoke build-up and sticking
Frequent cycling isolationSeat wear and leakage

Selection points

  • Coating type and thickness: tungsten carbide, chromium carbide or hard overlays matched to wear and temperature.

  • Seat design: spring-loaded or fixed seats, and scraping action to clear deposits.

  • Required leakage class, agreed with the supplier and tested before delivery; see seat leakage classes.

  • Actuator torque: metal-seated valves need more torque, especially after long idle periods.

  • Purge or flush connections for slurries and coking services.

Oil and gas facility

Getting long life

  • Operate valves fully open or closed; do not throttle with isolation valves.

  • Cycle idle valves periodically so deposits do not lock them.

  • Keep matched ball and seat sets together when repairing.

  • Track leakage and torque trends to plan refurbishment.

  • Hold spare trim sets for critical services.

ECONTROL from BTGC

Tecnologías ECONTROL engineers metal-seated ball valves, chokes, HIPPS and other severe service valves for mining and oil and gas. BTGC is the ECONTROL partner in Saudi Arabia. See also autoclave and slurry isolation valves, delayed coker valves and the mining and metals sector page.

Questions buyers ask

Do metal-seated ball valves leak more than soft-seated ones? Usually slightly more when new, but they keep sealing far longer in severe service.

Can coatings be repaired? Balls and seats can often be recoated and relapped by qualified shops.

Does BTGC supply ECONTROL valves? Yes, metal-seated ball valves and severe service valves.

Contact the BTGC valve team

Email valves@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.