In short: oil-free (dry) screw compressors compress gas between two meshing rotors with no oil in the compression chamber, so the gas stays clean and the machine tolerates dirty, wet or variable gases. They suit flare gas recovery, vapour recovery, off-gas and other process gas duties at medium flows and pressure ratios, where centrifugal compressors are not ideal and reciprocating compressors need more maintenance. BTGC supplies IHI oil-free screw compressors and turbo compressors.

Refineries, petrochemical plants and gas facilities in the Kingdom are cutting flaring and recovering more gas. Many of these duties involve gas with changing composition, liquids or polymers, which suits screw compressors.
Where oil-free screw compressors fit
| Duty | Why a screw compressor |
|---|---|
| Flare gas recovery | Handles varying flow and composition |
| Vapour recovery from tanks | Low suction pressure, wet gas |
| Process off-gas and recycle gas | Tolerates some liquids and fouling components |
| Gases that must stay oil-free | No oil carry-over into the process |
Design points
Rotor timing gears keep rotors from touching; clearances set efficiency.
Liquid injection can cool the gas and wash deposits in some services.
Capacity control by speed variation, slide valves or bypass, depending on design.
Shaft seals suited to toxic or flammable gases, often with buffer gas.
Packaging to API 619 for process service where specified.

Maintenance points
Trend discharge temperature, vibration and power to detect fouling or wear.
Wash rotors on line or off line where the service causes deposits.
Inspect timing gears, bearings and seals at overhauls.
Keep suction filters and separators working to protect rotors.
Monitor seal gas systems closely in toxic or flammable service.
IHI from BTGC
IHI Corporation of Japan makes oil-free screw compressors for process gas and turbo compressors for plant air and air separation. BTGC is the IHI partner in Saudi Arabia. See also turbo compressors, anti-surge valves and the petrochemicals sector page.
Questions buyers ask
Oil-free or oil-flooded screw compressor? Oil-free when the gas must stay clean or would contaminate the oil; oil-flooded designs suit cleaner gases and higher pressure ratios per stage.
Can screw compressors handle liquids? Some liquid can be tolerated, and liquid injection is used in some designs, but large slugs must be separated first.
Does BTGC supply IHI spare parts? Yes, overhaul parts and seals.
Contact BTGC
Email info@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.