In short: block valves on remote pipelines often have no electricity or instrument air nearby. Gas-over-oil actuators use the pipeline gas itself to drive hydraulic oil, while electro-hydraulic units store energy in accumulators charged by a small pump, often solar powered. Electric actuators suit stations with reliable power, and pneumatic ones suit plants with instrument air. The choice depends on available power, fail-safe needs and stroke speed. BTGC supplies ITAG pipeline valves with matched actuation.

Transmission pipelines across the Kingdom run hundreds of kilometres through desert, with block valves at stations that must close on demand or on a line break.
Actuator types
| Type | Power source | Typical use |
|---|---|---|
| Gas-over-oil | Pipeline gas pressure | Remote gas pipeline block valves |
| Electro-hydraulic | Electric pump and accumulator | Remote valves with solar or small power supply; liquid lines |
| Electric (multi-turn or quarter-turn) | Station power | Stations and terminals with reliable power |
| Pneumatic | Instrument air or nitrogen | Plants and process valves |
Sizing and selection points
Size on valve torque at maximum differential pressure, with a safety margin; see quarter-turn actuator sizing.
Decide fail position and whether stored energy must close the valve on power loss.
Check stroke time limits; fast closing can cause surge in liquid lines.
Allow for high ambient and solar heating on actuator seals and electronics.
Add line break detection where required; see block valve stations.

Testing and upkeep
Stroke-test actuated valves at planned intervals and record times.
Check hydraulic oil level, filters and accumulator pre-charge.
Keep manual override and handpumps working for emergencies.
Protect control panels and solar units from dust.
ITAG from BTGC
ITAG makes trunnion ball valves and pipeline gate valves in Jubail. BTGC supplies ITAG valves to operators and EPC contractors, with actuation packages to project specifications. See also Saudi-made pipeline valves and the oil and gas sector page.
Questions buyers ask
Why use pipeline gas to power an actuator? At remote sites it is the one reliable energy source always available.
Can gas-over-oil actuators be used on liquid lines? No, they need gas pressure; liquid lines use electro-hydraulic or other types.
Does BTGC supply valve and actuator as one package? Yes, the actuator is matched to the valve and supplied as one package.
Contact the BTGC valve team
Email valves@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.