In short: bulk terminals move millions of tonnes of clinker, coal, iron ore, bauxite, phosphate and other abrasive cargoes through grabs, hoppers, chutes and conveyors. Grab lips and shells, hopper walls and grids, and transfer chutes wear fast from impact and abrasion. Matching each zone with the right protection, from tough plate at impact points to bimetallic wear parts where material slides, cuts repair stops and keeps vessels moving. BTGC supplies Bimat bimetallic wear parts.

Ports on the Kingdom's Gulf and Red Sea coasts are growing as mining, metals and industrial imports and exports increase. Wear repairs on hoppers and grabs often happen between vessel calls, when time is short.
Wear zones at bulk terminals
| Zone | Wear type and option |
|---|---|
| Grab lips and cutting edges | Impact and abrasion; tough, hard edges and wear buttons |
| Grab shell inside | Sliding abrasion; bimetallic chocky bars or liners |
| Hopper grids and walls | Impact from dropped cargo; tough plate at grids, bimetallic parts on sliding walls |
| Transfer chutes | Sliding abrasion; bimetallic liners or ceramics |
| Conveyor skirt areas | Fine abrasion; suitable liner materials |
Layout tips
Separate impact zones from sliding zones and protect each appropriately.
Use rock boxes or material beds where cargo can protect the steel.
Place wear parts where material actually flows, based on inspection of wear patterns.
Standardise part sizes across grabs and hoppers to simplify stock.

Maintenance and records
Inspect wear parts after each vessel or at fixed tonnage intervals.
Replace before the parent steel is exposed.
Weld only to the steel backing of bimetallic parts and follow welding procedures.
Record wear life per location to improve the next layout.
Plan wear work in the maintenance windows between vessels.
Bimat from BTGC
Bimat of Germany supplies bimetallic wear parts for mining, earthmoving, cement, ports and bulk handling equipment. BTGC is the Bimat partner in Saudi Arabia. See also ship unloaders, bimetallic wear parts and the machinery handling page.
Questions buyers ask
Can bimetallic parts be used on grab lips? Heavy impact areas often need tougher materials; bimetallic parts suit areas of sliding wear.
How can I cut hopper wear? Use grids and material beds to take impact, and wear parts where material slides.
Does BTGC help with layouts? Yes, from drawings, photos and wear history.
Contact BTGC
Email info@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.