In short: hydrocrackers and hydrotreaters run at high pressure and temperature with hydrogen-rich gas, which leaks easily and can attack some steels. Valves in these units are often pressure seal designs, where internal pressure pushes the bonnet seal tighter instead of relying on a large bolted flange. Correct materials for hydrogen and sulphur compounds, tight stem sealing and careful maintenance of the pressure seal are essential. BTGC supplies Pacific pressure seal valves for refinery service.

Refineries in the Kingdom use hydroprocessing to make clean fuels and to upgrade heavy oil. A leaking valve in a hydrogen circuit is a fire risk, and an unplanned shutdown of a hydrocracker is very costly.
How pressure seal bonnets work
The bonnet sits inside the body and is held by a segmented ring.
Line pressure pushes the bonnet against a seal ring, so higher pressure makes the seal tighter.
There is no large bolted body-bonnet flange, which saves weight in high pressure classes.
Pressure seal designs are common in ASME Class 900 and above.
Hydrogen and high-temperature service points
| Issue | What to specify |
|---|---|
| Hydrogen leakage | Tight stem sealing, often live-loaded packing or bellows, and low-emission testing |
| Hydrogen attack at high temperature | Chromium-molybdenum steels chosen against API 941 guidance |
| Sulphur compounds | Materials and trim suited to H2S and high-temperature sulphidation |
| Thermal cycling | Robust seats and pressure seal arrangements that stay tight through cycles |
| Testing | High-pressure shell and seat tests, and gas tests where specified |

Maintenance of pressure seal valves
Follow the correct procedure to release and reassemble the pressure seal; mistakes cause leaks at start-up.
Replace pressure seal rings and gaskets at each opening.
Check seat and wedge contact and lap seats where needed.
Hot-tighten according to procedure after heat-up where the design requires it.
Keep records of every repair for each valve tag.
Pacific Valves from BTGC
Pacific Valves is the Crane ChemPharma and Energy brand for cast steel gate, globe and check valves in demanding refinery services, including high-pressure pressure seal valves. BTGC is the Pacific Valves partner in Saudi Arabia through Crane. See also valves for delayed coking units, low-emission valves and the oil and gas sector page.
Questions buyers ask
Why choose pressure seal over bolted bonnet valves? At high pressure classes they are lighter and the seal improves with pressure.
Can pressure seal valves be repaired in place? Many can, with the right tools and procedures; complex repairs are done in the workshop.
Does BTGC repair pressure seal valves? Yes, at the Jubail service center, with Pacific spare parts.
Contact the BTGC valve team
Email valves@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.