Valves for Sour Gas Service: NACE MR0175 / ISO 15156 in Practice

17.11.26 12:38 PM

In short: many oil and gas streams in the Kingdom contain hydrogen sulphide (H2S). In wet sour service, steels can crack suddenly under stress through sulphide stress cracking and related mechanisms. NACE MR0175 / ISO 15156 sets the rules for choosing materials that resist this, including hardness limits and approved alloys for pressure-containing parts, bolting and trim. Valves must be specified, made and documented to it. BTGC supplies ITAG pipeline valves made in Jubail for oil and gas service.

Valves made in Saudi Arabia

Sour gas fields, gas plants, gathering lines and refineries in the Kingdom rely on valves that meet sour service rules. A valve that fails by cracking in H2S service can release toxic gas, so this is a safety issue as well as a reliability one.

What can go wrong in sour service

  • Sulphide stress cracking (SSC): brittle cracking of high-strength or hard steels under tensile stress.

  • Hydrogen-induced cracking (HIC) and blistering in some plate and pipe steels.

  • Stress corrosion cracking in some stainless steels and alloys under certain conditions.

  • Cracking often appears at welds and hard zones, and in high-strength bolting.

What the standard controls

AreaTypical requirements
Carbon and low-alloy steelsHardness limits for base metal, welds and heat-affected zones, with suitable heat treatment
Stainless steels and alloysLists of acceptable alloys with limits on temperature, H2S partial pressure, chloride and pH
BoltingBolting grades suitable for sour exposure where bolts are exposed
Trim and springsMaterials qualified for the service conditions
DocumentationMaterial certificates showing compliance and hardness testing records
Gas processing plant

Practical checks for buyers

  • State the sour service conditions in the enquiry: H2S partial pressure, pH, chlorides and temperature.

  • Require compliance to NACE MR0175 / ISO 15156 for all pressure-containing and pressure-controlling parts.

  • Ask for hardness test results on bodies, welds and heat-affected zones.

  • Check bolting specification for buried, insulated or enclosed bolts.

  • Add owner requirements, such as HIC testing for plate materials where specified.

ITAG from BTGC

ITAG in Jubail manufactures high-pressure trunnion mounted ball valves and pipeline gate valves for oil and gas, including sour service. BTGC is the ITAG partner in Saudi Arabia. See also Saudi-made pipeline valves, valve body materials and the oil and gas sector page.

Questions buyers ask

Is a valve made from 316 stainless steel automatically sour-service compliant? No. Each alloy has limits on conditions in the standard; compliance must be checked for the actual service.

Why does hardness matter so much? Harder, higher-strength steels are more prone to sulphide stress cracking, so hardness is limited.

Can BTGC supply certified sour service valves? Yes, with material and hardness certificates.

Contact the BTGC valve team

Email valves@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.