Transformers for Solar PV Plants: Inverter Duty, Harmonics and Desert Heat

17.11.26 03:18 PM

In short: large solar PV plants collect power from inverters at low voltage and step it up to medium voltage through inverter or station transformers, and then to transmission voltage at the main substation. These transformers see harmonics from inverters, a daily load cycle that peaks in the hottest hours, and harsh desert conditions. Designing them for inverter duty, heat and dust, and sourcing them locally, supports reliable output and local content targets. BTGC supplies Arabian Transformers (ATC) transformers made in the Kingdom.

Arabian Transformers transformer

The Kingdom is building gigawatts of solar PV capacity, many in remote desert locations. Each plant uses large numbers of medium voltage transformers that must run reliably for decades.

What makes PV transformers different

FactorDesign response
Inverter harmonicsWindings and losses designed for harmonic currents; shielding between windings where specified
Multiple inverters on one unitMulti-winding designs in some plants
Peak load at peak heatThermal design for maximum ambient and solar radiation
Daily cyclingInsulation and mechanical design for repeated heating and cooling
Dust and sandSealed tanks, suitable radiators and cleaning access

Specification points

  • Rating at the real site ambient and with solar gain on the tank; see transformers for Saudi conditions.

  • Loss requirements and efficiency rules.

  • Insulating liquid: mineral oil or ester for fire safety.

  • Protection and monitoring: temperature, oil level, pressure relief and gas relay.

  • Compact substation packaging where suitable; see compact substations.

Transformer radiators

Operation and maintenance

  • Clean radiators and check fans before summer.

  • Take oil samples for DGA and moisture on a schedule; see oil testing.

  • Check gaskets and seals for leaks caused by daily cycling.

  • Monitor temperatures remotely across the plant.

  • Keep spare units for fast replacement in large plants.

Arabian Transformers from BTGC

Arabian Transformers Company (ATC) manufactures distribution and power transformers, compact substations and package units in the Kingdom. BTGC is the ATC partner in Saudi Arabia. See also the electrical power systems page and the power and utilities sector page.

Questions buyers ask

Can a standard distribution transformer be used for PV? Only if it is rated for the harmonics, load cycle and ambient; inverter-duty designs are safer.

Why consider ester fluids? They have higher fire points and are biodegradable, useful at some sites.

Does ATC supply transformers for solar projects? Yes, ATC manufactures transformers for utility and renewable projects in the Kingdom.

Contact the BTGC power division

Email power@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.