Turbine Oil Varnish: Causes, Detection and Prevention

16.11.26 09:10 AM

In short: varnish is a sticky deposit that forms when turbine oil degrades, and it causes servo valves to stick, bearings to run hot and units to trip on start-up. Heat, air entrainment and long oil life make it common in Saudi gas turbines. Regular MPC testing catches it early, and oils with better oxidation stability slow it down. BTGC supplies Royal Purple turbine and compressor oils.

Royal Purple industrial synthetic lubricants

Gas turbines at Saudi power plants and process sites run long hours at high oil temperatures. Over time the oil oxidises and thermally breaks down, forming soft particles that dissolve while the oil is hot and drop out as varnish when it cools. The deposit builds up on servo valves, bearing surfaces and coolers, and the first sign is often a failed start or a trip during load change.

What causes varnish

CauseMechanism
High bulk oil temperatureSpeeds up oxidation of the base oil and additives
Air entrainment and micro-dieselingCompressed air bubbles ignite locally and char the oil
Electrostatic discharge in filtersSparks in fine filters degrade the oil
Long drain intervalsAntioxidants are used up while the oil still looks clean

How to detect it early

  • MPC (membrane patch colorimetry) to ASTM D7843 measures varnish potential; a rising MPC value is the earliest warning.

  • RULER to ASTM D6971 tracks the remaining antioxidants.

  • RPVOT to ASTM D2272 measures oxidation resistance.

  • Trend these together with acid number and water content at least quarterly on critical units.

Royal Purple synthetic oil protecting gears and bearings

Preventing varnish

  • Choose a turbine oil with high oxidation stability and low deposit tendency for the duty.

  • Keep the oil cool: clean coolers and check cooling water before summer.

  • Use varnish removal systems on units with a history of deposits.

  • Avoid topping up with an incompatible oil; mixing can cause additive drop-out.

Royal Purple from BTGC

Royal Purple, part of Calumet, formulates synthetic turbine, compressor and industrial oils designed for oxidation stability. BTGC is the Royal Purple industrial partner in Saudi Arabia, alongside Bel-Ray and Calumet. See also food-grade H1 lubricants and the rotating equipment and lubrication page.

Questions buyers ask

Can a varnished system be cleaned without a shutdown? Varnish removal units can work online; heavy deposits may need a flush during an outage.

Is synthetic oil compatible with our existing turbine oil? Compatibility must be checked before topping up or converting; BTGC advises on flushing when changing oil type.

How often should MPC be tested? Quarterly on critical turbines, or more often if the trend is rising.

Contact BTGC

Email info@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.