Couplings for Turbomachinery: Diaphragm, Disc and Gear Types

18.11.26 01:12 PM

In short: couplings in compressor, turbine and generator trains transmit high torque at high speed while allowing small misalignment. API 671 sets the requirements for these special-purpose couplings. Flexible metal-element couplings (diaphragm or disc) need no lubrication and are now the usual choice, while gear couplings still serve some high-torque duties. The coupling also affects the train's rotordynamics and torsional behaviour. BTGC supplies RENK gear units, bearings and couplings.

RENK high-speed gear unit components

Gas plants, refineries and power stations in the Kingdom run critical trains where a coupling failure stops production.

Coupling types

TypeStrengthsWatch points
DiaphragmNo lubrication, high speed, low reaction forcesLimited misalignment; protect from overload
Disc packNo lubrication, easy to inspectDisc fatigue if misaligned
GearHigh torque in a small sizeNeeds lubrication; wear and lock-up if oil fails
Highly flexible (elastomer)Damps torsional vibration, for example in engine drivesElement ageing and temperature limits

What API 671 covers

  • Rating with service factors on continuous and peak torque.

  • Balance quality for high-speed operation.

  • Spacer length and limits on axial and angular misalignment.

  • Materials, inspection and documentation.

  • Data needed for the train's lateral and torsional analysis; see torsional vibration in drive trains.

Gas processing and petrochemical plant

In service

  • Align trains for hot running, allowing for thermal growth when aligning cold.

  • Inspect flexible elements for cracks, and gear teeth for wear, at overhauls.

  • Ventilate guards, since windage can heat enclosed couplings at high speed.

  • Replace couplings as balanced assemblies and do not mix parts.

  • For gear couplings, see gear coupling care.

RENK from BTGC

RENK makes high-speed gear units, slide bearings and couplings for industrial and energy drives. BTGC supplies RENK in Saudi Arabia for enquiries, spare parts and service coordination. See also API 613 gear units and the rotating equipment page.

Questions buyers ask

Why choose a diaphragm coupling over a gear coupling? No lubrication and less maintenance; gear couplings remain useful for very high torque in small spaces.

Can a new coupling change train vibration? Yes, its stiffness and mass change torsional natural frequencies, so any change needs review.

Does BTGC supply replacement couplings? Yes, through RENK, matched to the existing train data.

Contact BTGC

Email info@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.