Vacuum Dehydration and Degassing of Transformer Oil

17.11.26 02:17 PM

In short: water and dissolved gases in transformer oil lower its dielectric strength and speed up the ageing of paper insulation. Vacuum oil treatment plants heat the oil, spray it into a vacuum chamber to release water and gas, and filter it, while vacuum is also used to dry out transformer insulation and fill tanks without trapped air. Reliable vacuum pumps sized for the job are at the heart of this work. BTGC supplies Leybold vacuum pumps and systems.

Leybold vacuum pumps

Utilities, industrial plants and transformer workshops in the Kingdom treat oil during installation, after repairs and as part of maintenance. Humid coastal air and high temperatures make moisture control important.

What vacuum treatment does

  • Removes dissolved water, raising breakdown voltage.

  • Removes dissolved gases and air, reducing bubble formation under electrical stress.

  • Removes particles through filtration.

  • Allows vacuum filling so oil penetrates the paper insulation without air pockets.

  • Supports drying of transformer active parts in the field or workshop.

Typical oil treatment plant

ComponentFunction
HeaterWarms oil to help release water
Degassing chamber with distribution elementsSpreads oil into thin films under vacuum
Vacuum pumps and boostersCreate and hold low pressure; Roots boosters raise pumping speed
FiltersRemove particles before and after the chamber
InstrumentsMeasure vacuum, temperature, moisture and flow
Power transformer radiators

Practical tips

  • Size vacuum pumps for the chamber volume, gas load and target pressure.

  • Protect pumps from oil mist and water vapour with traps and gas ballast where needed.

  • Check oil quality before and after treatment: water content, breakdown voltage and gas analysis.

  • Treat until results meet the transformer maker's and owner's limits.

  • Maintain pumps with oil and filter changes and leak checks on the system.

Leybold from BTGC

Leybold of Germany makes rotary vane, dry screw, Roots and turbomolecular vacuum pumps and complete vacuum systems. BTGC is the Leybold partner in Saudi Arabia. See also choosing vacuum pumps, transformer oil specification and the electrical power systems page.

Questions buyers ask

Can vacuum treatment be done with the transformer energised? Some on-line treatment systems exist, but most vacuum work is done de-energised; follow the owner's safety rules.

Why use a Roots booster? It raises pumping speed at low pressure, shortening treatment time.

Does BTGC supply complete vacuum skids? Yes, pumps and systems sized for the application.

Contact the BTGC power division

Email power@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.