White Oils for Food, Pharmaceutical, Cosmetic and Polymer Use

17.11.26 04:25 PM

In short: white oils are highly refined mineral oils that are colourless, odourless and almost free of aromatics and impurities. Depending on their purity they are used as food-grade and pharmaceutical ingredients, in cosmetics and personal care, and as technical oils in polymer production, textiles and lubricants. Choosing the right grade and keeping it clean in storage and handling matters as much as the oil itself. BTGC supplies Calumet white oils and specialty products.

Chemical process plant

Food, pharmaceutical, personal care and polymer producers in the Kingdom use white oils as ingredients, processing aids and lubricants. Grade and documentation requirements vary by use.

Grades and typical uses

GradeTypical uses
Pharmaceutical (USP, EP)Ointments, laxatives, personal care
Food gradeRelease agents, coatings, food-processing lubricants
CosmeticCreams, baby oils, hair care
TechnicalPolymer processing (for example polystyrene), textiles, plastics, lubricant blending

Selection points

  • Required standard or pharmacopoeia and documentation.

  • Viscosity grade for the application.

  • Purity limits such as aromatic and sulphur content.

  • Packaging and storage suited to keeping the oil clean.

  • Supply security and batch traceability.

Process piping

Handling and storage

  • Store in clean, dedicated tanks or containers to avoid contamination.

  • Keep containers closed and away from moisture and dust.

  • Use dedicated transfer equipment for food and pharmaceutical grades.

  • Keep certificates of analysis and batch records.

  • Follow the shelf-life guidance from the supplier.

Calumet from BTGC

Calumet is a US specialty refiner of white oils, naphthenic oils, solvents and lubricants, and the parent of the Royal Purple and Bel-Ray brands. BTGC is the Calumet partner in Saudi Arabia. See also food-grade H1 lubricants, transformer oils and the petrochemicals sector page.

Questions buyers ask

Is food-grade white oil the same as an H1 lubricant? Not exactly; white oil can be an ingredient or a base for H1 lubricants, which are formulated and registered for incidental food contact.

Why use white oil in polystyrene production? It is used as a processing aid and plasticiser in some grades.

Does BTGC supply certificates of analysis? Yes, with each batch.

Contact BTGC

Email info@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.