In short: in activated sludge wastewater plants, the blowers that supply air to the aeration tanks are usually the biggest energy users on site. Choosing the right blower type and controlling it to the actual oxygen demand can save a large share of plant energy. Rotary lobe, rotary screw, multistage centrifugal and single-stage turbo blowers all have a place; the best choice depends on airflow range, pressure, turndown and how many machines share the load. BTGC supplies Ingersoll Rand centrifugal compressors and blowers.

The Kingdom is expanding sewage treatment and water reuse quickly, and many plants operate at varying loads through the day and the year. Blowers sized only for peak load often run inefficiently most of the time.
Blower types compared
| Type | Strengths | Limits |
|---|---|---|
| Rotary lobe | Simple, robust, wide pressure range | Lower efficiency, noise |
| Rotary screw blower | Better efficiency than lobe blowers, good turndown with speed control | Higher cost than lobe |
| Multistage centrifugal | Proven, durable for large flows | Limited turndown, lower efficiency at part load |
| Single-stage turbo (geared or high-speed) | High efficiency, good turndown with guide vanes or speed control | Higher first cost, needs good inlet filtration |
Getting efficiency in operation
Control airflow from dissolved oxygen measurements in each aeration zone.
Use pressure set points that follow demand rather than a fixed high pressure.
Combine machines of different sizes so the duty blower runs near its best efficiency.
Keep diffusers clean; fouled diffusers raise pressure and power.
Account for hot inlet air in summer, which reduces air mass delivered.

Maintenance points
Change inlet filters on schedule; dust in the Kingdom loads them quickly.
Trend vibration, bearing temperature and motor current.
Check blow-off and check valves for leakage.
Service lubrication systems and couplings according to the maker's plan.
Review energy use per cubic metre of air each month to spot problems early.
Ingersoll Rand from BTGC
Ingersoll Rand makes compressed air and gas equipment, including centrifugal air compressors and blowers for industry and wastewater treatment. BTGC is the Ingersoll Rand partner in Saudi Arabia. See also wastewater lift station pumps, VFDs for pumps and fans and the power and utilities sector page.
Questions buyers ask
How much energy do aeration blowers use? They are often the largest single energy use in an activated sludge plant, commonly around half of the total.
Can old blowers be replaced without changing the aeration system? Usually yes, if the new blowers match the pressure and flow range; controls are often upgraded at the same time.
Does BTGC offer energy surveys? Yes, with Ingersoll Rand data on existing blower performance and options.
Contact BTGC
Email info@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.