In short: air heating coils pass air over finned tubes carrying steam, hot water or thermal oil. They heat air for product dryers, spray dryers, combustion air preheat and building or process ventilation. Steam coils need good condensate drainage to avoid water hammer and tube damage, while thermal oil coils need care with fouling and fire risk. Finned tube design sets heat transfer and pressure drop. BTGC supplies Rex finned tube heat exchangers and coils.

Polymer, food, fertiliser and chemical plants in the Kingdom heat large volumes of air for drying and process use, often with low-pressure steam.
Heating media compared
| Medium | Strengths | Watch points |
|---|---|---|
| Low-pressure steam | High heat transfer, steady temperature | Condensate drainage, water hammer |
| Hot water | Gentle, easy control | Lower temperatures only |
| Thermal oil | High temperature at low pressure | Oil degradation, leaks and fire risk |
Design points
Size for the air flow, inlet and outlet temperatures and the heating medium conditions.
Choose fin type and spacing for dust load and cleaning; see finned tube types.
For steam, use correct tube slope, headers and traps so condensate leaves freely.
Check air-side pressure drop against the fan.

Operation and upkeep
Keep steam traps working; flooded coils lose capacity and suffer water hammer.
Use vacuum breakers on modulated steam coils to help drainage.
Clean fins of dust and product to restore capacity.
Check thermal oil quality and look for leaks at headers.
Control steam pressure upstream; see steam pressure reducing valves.
Rex Heat Exchanger from BTGC
Rex Heat Exchanger makes finned tube heat exchangers, including air-heating coils, and coolers for transformers, motors and compressors. BTGC supplies Rex in Saudi Arabia for new and replacement units. See also thermal management and the petrochemicals sector page.
Questions buyers ask
Why do steam coils fail? Often from water hammer and corrosion caused by poor condensate drainage.
Can a coil be replaced to existing dimensions? Yes, send the drawing or nameplate and operating data.
Which fin type suits dusty air? Wider fin spacing and robust fins that tolerate cleaning.
Contact BTGC
Email info@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.