Finned Tube Types: Extruded, Embedded, L-Foot or Welded

18.11.26 01:15 PM

In short: air-cooled heat exchangers and coolers use fins to multiply the outside surface of each tube. How the fin is fixed to the tube decides its temperature limit, how well it transfers heat over the years and how it resists corrosion and cleaning damage. Extruded and embedded fins hold best in hot, corrosive or dusty conditions, while wrapped L-foot fins cost less for milder duties. BTGC supplies Rex finned tube heat exchangers and coolers.

Coolers and fans on a large power transformer

Air coolers, transformer oil coolers and compressor coolers in the Kingdom work in heat, dust and, near the coast, salty air.

Fin types compared

TypeHow it is madeTypical use
L-foot (wrapped)Aluminium strip wound on with a foot covering the tubeLower temperatures and mild atmospheres; low cost
KL-footL-foot fin knurled into the tube surfaceBetter bond and temperature range than plain L-foot
Embedded (G-fin)Fin wound into a groove in the tube wallHigher temperatures; tube surface exposed between fins
ExtrudedFins formed from an aluminium sleeve around the tubeGood bond and tube protection; favoured on coastal and corrosive sites
WeldedSteel fin welded to a steel tubeVery high temperatures, heaters and economisers

What to consider

  • Process temperature, including upsets and steam-out.

  • Atmosphere: coastal salt, sulphur compounds and dust favour extruded or coated fins.

  • Cleaning: high-pressure water can bend thin fins, so choose fin type and density to suit.

  • Fin density: more fins add surface but trap dust faster.

  • Refinery air coolers usually follow API 661.

Oil and gas facility in Saudi Arabia

Keeping coolers effective

  • Clean fins on a schedule, and more often after sandstorms.

  • Look for loss of fin-to-tube bond, seen as uneven temperatures on thermography.

  • Straighten bent fins and fix fan and louvre faults.

  • See also summer air cooler performance.

Rex Heat Exchanger from BTGC

Rex Heat Exchanger makes finned tube heat exchangers, transformer oil coolers, intercoolers and motor coolers. BTGC supplies Rex in Saudi Arabia for new and replacement coolers. See also transformer radiators and motor coolers and thermal management and cooling.

Questions buyers ask

Which fin type suits sites near the sea? Extruded or coated fins are often chosen for coastal and corrosive air.

Can a cooler be retubed with a different fin type? Often yes, once the thermal design is rechecked.

Can BTGC supply a replacement cooler to existing dimensions? Yes, send the drawing or nameplate data.

Contact BTGC

Email info@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.