Transformer Radiators and Motor Air Coolers: Cleaning, Leaks and Replacement

17.11.26 12:00 PM

In short: large transformers and motors depend on their coolers to stay within temperature limits. Transformer radiators cool the oil, and motors use air-to-air (CACA) or air-to-water (CACW) coolers mounted on the machine. Dust, sand and salt reduce heat transfer, and leaking tubes in water-cooled motor coolers can put water into the windings. Regular cleaning, leak testing and timely replacement keep machines from overheating and ageing early. BTGC supplies Rex finned tube coolers and radiators.

Water-cooled electric motor with top-mounted cooler

Sand and dust storms, coastal humidity and high summer temperatures in the Kingdom put coolers under constant stress. A cooler that has lost a fraction of its capacity may go unnoticed until the hottest weeks of the year, when the machine trips or runs over temperature.

Where coolers are used

EquipmentCooler type
Oil-filled transformersRadiators with natural (ONAN) or fan (ONAF) air flow
Large motors and generators, air-cooledAir-to-air tube coolers (CACA) on top of the machine
Large motors and generators, water-cooledAir-to-water coolers (CACW) with leak detection
Gear units and lube oil systemsFinned tube or shell and tube oil coolers

Signs a cooler needs attention

  • Winding, oil or bearing temperatures rising year on year at the same load.

  • Visible dust or sand packed between fins.

  • Corrosion of fins and tube sheets, especially near the coast.

  • Leak detector alarms or damp marks on water-cooled motor coolers.

  • Cooling fans not running or running slowly.

Transformer radiators and cooling fans

Cleaning, testing and replacement

  • Clean fins with compressed air or low-pressure water from the clean side, without bending fins.

  • Pressure test water-cooled coolers at overhauls and repair or plug leaking tubes.

  • Check fans, motors and thermostats on transformer cooling systems before summer.

  • Replace coolers that have lost too much capacity or have repeated leaks; choose tube and fin materials suited to the water and air quality.

  • Make sure replacements match thermal rating and mounting dimensions.

Rex from BTGC

Rex Heat Exchanger of India makes finned tube heat exchangers, radiators and coolers for transformers, motors, generators and compressors. BTGC is the Rex partner in Saudi Arabia, with full electric motor services at the Jubail service center. See also water-cooled electric motors, transformer loading in high ambient and air fin coolers.

Questions buyers ask

How often should transformer radiators be cleaned? At least before each summer, and more often on dusty or coastal sites.

Can a leaking CACW cooler be repaired? Often yes, by plugging or replacing tubes, but repeated leaks usually mean replacement is due.

Does BTGC supply replacement coolers for other brands? Yes, Rex can build coolers to match existing dimensions and ratings.

Contact the BTGC power division

Email power@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.