Air Valves for Water and Wastewater Pipelines

18.11.26 07:31 AM

In short: trapped air in a water pipeline reduces capacity, raises pumping costs and can cause damaging pressure surges, while draining or a pump trip can pull a vacuum that collapses pipes or sucks in contaminated water. Air valves at the right locations let air out during filling and operation and let air back in when the pipe drains. Wastewater lines need special designs that resist clogging by grease and solids. BTGC supplies AVK air valves for water and wastewater networks.

AVK water valves and hydrant

The Kingdom's long desalinated water transmission lines and city networks cross changing terrain, with many high points where air collects. Missing or failed air valves are a common hidden cause of pipe bursts and poor capacity.

Types of air valves

TypeFunction
Large orifice (kinetic)Releases large volumes of air during filling and admits air during draining
Small orifice (automatic)Releases small air pockets while the line runs under pressure
Double or combinationBoth functions in one valve
Surge-limiting or non-slamControls air release to reduce surges when water column rejoins
Wastewater air valvesLong body and design that keep sewage away from the mechanism

Where to place air valves

  • At high points and peaks along the profile.

  • At changes of gradient, especially increases in downward slope or decreases in upward slope.

  • At intervals along long flat or uniform sections, following design guides such as AWWA M51.

  • Near pump discharges and upstream or downstream of line valves where air can gather.

  • Each installation needs an isolating valve for maintenance.

Water transmission pipeline

Maintenance tips

  • Inspect and exercise air valves on a set schedule.

  • Check for leaks, stuck floats and blocked orifices.

  • Flush wastewater air valves regularly to remove grease and debris.

  • Protect chambers from flooding and sand.

  • Review surge events and bursts to find missing or failed air valves; see water hammer protection.

AVK from BTGC

AVK of Denmark makes valves, hydrants and fittings for water, wastewater and gas; AVK SVMC manufactures in the Kingdom. BTGC is the AVK partner in Saudi Arabia. See also water network valves, sewer and wastewater valves and the power and utilities sector page.

Questions buyers ask

Why does air in a pipeline matter? It reduces flow, wastes pump energy and can cause dangerous pressure surges.

Can drinking water air valves be used on sewage lines? No, wastewater needs designs that keep solids and grease away from the mechanism.

Does BTGC supply AVK air valves? Yes, for water and wastewater pipelines.

Contact the BTGC valve team

Email valves@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.