API 610 Pump Types Explained: OH, BB and VS Configurations

17.11.26 11:52 AM

In short: API 610 (also ISO 13709) is the standard for centrifugal pumps in petroleum, petrochemical and gas industry service. It groups pumps into three families: overhung (OH), between-bearings (BB) and vertically suspended (VS), each with numbered types. Knowing the types helps match the pump to temperature, pressure, flow and NPSH, and to read datasheets correctly. BTGC supplies Akay API 610 and chemical process pumps.

Akay API 610 centrifugal process pump

Refineries, gas plants and petrochemical complexes in the Kingdom specify API 610 pumps for most hydrocarbon and critical services, often with owner additions on top. Selecting the right type early avoids costly changes during design reviews.

Common pump types

TypeDescriptionTypical use
OH2Horizontal, centreline-mounted, single-stage overhung pump with its own bearing housingThe most common refinery process pump for moderate flows and heads
OH3Vertical in-line pump with separate bearing bracketSpace-saving process duties
BB1Axially split, one or two stage between-bearings pumpLarge flows at moderate pressure, such as pipeline and cooling water duties
BB2Radially split, one or two stage between-bearings pumpHigh temperature or high pressure duties, larger flows
BB3Axially split multistage pumpHigh head services such as pipeline and water injection
BB5Double-casing (barrel) multistage pumpVery high pressure or hazardous services such as boiler feed
VS1 to VS7Vertically suspended pumps, including can-type and sump designsLow NPSH available, sumps and tanks

Key API 610 requirements

  • Design for a long service life, with heavy casings, corrosion allowance and pressure ratings for the worst case.

  • Bearing life, vibration limits and rotor dynamics criteria.

  • Seal chambers designed for API 682 mechanical seals and seal flush plans; see API Plan 53 seal systems.

  • Defined preferred operating region and minimum continuous stable flow.

  • Shop testing, including performance and often NPSH and mechanical run tests.

Oil and gas facility

Tips for buyers and users

  • Give accurate rated and normal flow; oversizing pushes the pump away from its best efficiency point.

  • Check NPSH margin carefully for light hydrocarbons and hot services.

  • Choose materials using the API 610 material class tables and the fluid data.

  • Keep spare rotating elements for critical pumps to shorten repairs.

  • Trend vibration and bearing temperature to plan overhauls.

Akay from BTGC

Akay Industries supplies API 610 pumps, including OH2, BB1, BB2, BB3 and VS4 types, and ISO 2858 and ISO 5199 chemical process pumps. BTGC is the Akay partner in Saudi Arabia. See also split case pumps, vertical turbine pumps and the rotating equipment page.

Questions buyers ask

Is an ISO 5199 chemical pump the same as an API 610 pump? No. ISO 5199 pumps are lighter-duty process pumps; API 610 has stricter design and testing rules for oil and gas service.

When is a BB2 pump chosen over an OH2? When temperature, pressure, flow or shaft loads exceed what an overhung design handles well.

Does BTGC supply spare parts? Yes, genuine Akay spare parts and complete rotating elements.

Contact BTGC

Email info@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.