Valves for Aviation Fuel Farms and Hydrant Systems

17.11.26 12:37 PM

In short: airport fuel farms and hydrant systems store and deliver jet fuel to aircraft, where fuel quality and safe isolation are critical. Even a small leak past a closed valve can mix fuel grades, let water or dirt into clean fuel, or make maintenance unsafe. That is why double block and bleed plug valves, which allow the seal to be checked through a bleed, are widely used for tank isolation, filter vessels and hydrant pipelines. BTGC supplies 3Z Valve DBB plug valves.

3Z double block and bleed plug valves

The Kingdom is expanding airports and aviation fuel capacity rapidly, with new terminals, fuel farms and hydrant networks. Fuel systems follow strict industry guidance on design, quality control and maintenance, such as Energy Institute and JIG standards.

Where DBB valves are used

LocationWhy DBB
Tank inlet and outletPositive isolation of a tank for cleaning, inspection or quality hold
Product receipt linesPrevents mixing of different fuels or contaminated batches
Filter water separator vesselsSafe isolation for element changes
Hydrant pipeline sectionsIsolation for maintenance and pressure testing
Meter and prover skidsVerifiable isolation for accurate metering

Valve requirements

  • Materials compatible with jet fuel and that do not contaminate it, typically with internal coatings or stainless steel parts.

  • Verified seal integrity with a body bleed, plus thermal relief for trapped fuel.

  • Fire-safe designs where specified; see fire-safe valves.

  • Actuation and position indication for automated fuel farms.

  • Full documentation and pressure test records for each valve.

Fuel storage and pipeline facility

Maintenance and checks

  • Check the bleed for leakage after closing valves used for isolation, and record results.

  • Replace slip seals at planned intervals or when bleed checks show leakage.

  • Check thermal relief valves and bleed valves themselves.

  • Keep valve operators adjusted so slips seal fully.

  • Follow the fuel system operator's maintenance and quality procedures.

3Z Valve from BTGC

3Z Valve of Korea specialises in double block and bleed plug valves and sleeved plug valves. BTGC is the 3Z Valve partner in Saudi Arabia, with testing and repair at the Jubail service center. See also DBB plug valves for metering and terminals and the oil and gas sector page.

Questions buyers ask

Why not use ordinary ball valves in fuel farms? They can be used in some places, but DBB plug valves let operators prove isolation with a bleed, which suits tank and product isolation.

Do DBB valves need a thermal relief? Yes, fuel trapped between the seals expands when it warms and must be relieved.

Can BTGC repair DBB valves locally? Yes, at the Jubail service center, including seal replacement and testing.

Contact the BTGC valve team

Email valves@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.