In short: some services need more than a valve that is believed to be shut: they need isolation that can be proven while the line is in operation. Expanding-plug double block and bleed (DBB) valves seal with two independent slips against the body, and a bleed between them shows at once whether either seal is passing. That makes them the standard choice for custody transfer meter runs and provers, multi-product terminals and tank farm manifolds. BTGC supplies 3Z Valve DBB plug valves and sleeved plug valves.

At a crude or product terminal, a few litres leaking past a closed valve can spoil a product batch, upset a meter proving run or create a dispute over a cargo. A conventional valve gives no sign of a small leak. A DBB plug valve lets the operator open a small bleed valve and see directly that the isolation is tight.
How an expanding-plug DBB valve works
The plug carries two slips, each with its own resilient seal, one on each side.
To open, the operator first retracts the slips from the body, then turns the plug; the seals do not rub on the body as the valve moves.
To close, the plug turns to the closed position and then wedges the slips outwards against the body seats.
With both slips sealed, a bleed valve on the body cavity can be opened to verify that neither side is leaking.
A thermal relief valve, often relieving to the upstream side, protects the sealed cavity from pressure rise as the product warms.
Where they are used
| Service | Why DBB plug valves suit it |
|---|---|
| Custody transfer meter runs and provers | Any leak past a closed valve during proving makes the meter factor wrong |
| Multi-product pipelines and terminals | Prevents contamination between products at manifolds |
| Tank farm manifolds | Allows safe isolation of one tank while neighbouring tanks stay in service |
| Fuel gas and fuel hydrant systems | Positive isolation for maintenance on burners and dispensers |

Maintenance and checks
Open the body bleed after closing to confirm the seal; record results for metering audits.
Replace slip seals at planned intervals or when the bleed check shows passing; many designs allow this without removing the body from the line.
Check the thermal relief valve and the bleed valve themselves, which can block or pass.
Keep the operator or actuator adjusted so the slips fully expand when closed.
Pressure test after repair; see seat leakage classes.
Other plug valve options
For dirty, polymerising or corrosive services, sleeved and lined plug valves are often a better fit, as compared in lubricated or sleeved plug valves.
3Z Valve from BTGC
3Z Valve of Korea specialises in double block and bleed plug valves and sleeved plug valves. BTGC is the 3Z Valve partner in Saudi Arabia, with testing and repair at the BTGC service center in Jubail. See also DBB and DIB in pipeline ball valves and the flow control and valves page.
Questions buyers ask
Is one DBB plug valve as good as two valves with a bleed between them? It provides two seals and a bleed in one body, saving space and weight; the owner's isolation philosophy decides where each is accepted.
Why does the body need a thermal relief? Liquid trapped between the two seals expands as it warms and can overpressure the body.
Can BTGC repair existing DBB plug valves? Yes, including slip seal replacement and testing at the Jubail service center.
Contact the BTGC valve team
Email valves@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.