Compressed Air Audits: Measure Demand Before Buying a Compressor

18.11.26 03:00 PM

In short: plants often buy a bigger compressor when pressure drops, but the real cause may be leaks, poor piping or users running at higher pressure than they need. A compressed air audit logs flow, pressure and power over one or two weeks, finds leaks and waste, and shows the real demand profile. Only then can the right compressor size and control be chosen. BTGC supplies Ingersoll Rand compressors and blowers with maintenance support.

Ingersoll Rand centrifugal air compressor

Compressed air is one of the most expensive utilities in a plant, and Saudi summers push compressors to their limits.

What an audit measures

ItemWhy
Flow over timeShows base load, peaks and night demand
Pressure at compressors and usersReveals pressure drop in piping and treatment
Power and loading of each compressorShows efficiency and wasted unloaded running
LeaksOften a large share of total demand
Air qualityMoisture, oil and particles against what users need

Common findings

  • Leaks at hoses, fittings and drains wasting a large share of air.

  • Header pressure set higher than any user needs.

  • Open blowing, cleaning with air guns and other low-value uses.

  • Undersized pipes and clogged filters causing pressure drop; see piping design.

  • Several compressors part-loaded instead of one well-loaded machine.

Compressed air and process piping

Turning results into action

  • Fix leaks first, then re-measure demand.

  • Reduce pressure step by step while watching users.

  • Size new compressors for the measured profile, with base-load and trim machines.

  • Add storage and sequencing controls; see compressed air energy savings.

  • Repeat audits every few years or after plant changes.

Ingersoll Rand from BTGC

Ingersoll Rand makes centrifugal air compressors and blowers. BTGC supplies Ingersoll Rand in Saudi Arabia with spare parts and maintenance support. See also compressor rooms in hot climates and the petrochemicals sector page.

Questions buyers ask

How long should an audit run? Usually one to two weeks, covering normal production and weekends.

Can leaks really be that large? Yes, in older plants leaks are often one of the largest single users of air.

Do I need to stop production for an audit? No, loggers are fitted while the plant runs.

Contact BTGC

Email info@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.