Cutting Compressed Air Energy Costs: Leaks, Pressure and Compressor Control

17.11.26 04:27 PM

In short: compressed air is one of the most expensive utilities in a plant, because most of the electrical energy used by compressors becomes heat. Leaks, pressure set higher than needed, compressors running unloaded and poor control between several machines waste a large share of that energy. A structured approach, measuring demand, fixing leaks, lowering pressure and improving control, often cuts compressed air energy use substantially. BTGC supplies IHI turbo and screw compressors.

IHI compressor package

Rising electricity prices and energy efficiency programmes in the Kingdom are pushing plants to look at utilities such as compressed air. Many systems have grown over years without a review.

Where energy is wasted

WasteTypical cause
LeaksFittings, hoses, valves and drains; can be a large share of demand
High pressureSet point raised to cover pressure drops or one demanding user
Unloaded runningCompressors running without producing air
Poor sequencingSeveral compressors part-loaded instead of one fully loaded
Inappropriate usesOpen blowing, cooling and cleaning with compressed air
Pressure dropUndersized pipes, dirty filters and dryers

Practical steps

  • Measure flow, pressure and power to understand real demand.

  • Run regular leak surveys with ultrasonic detectors and fix leaks quickly.

  • Lower header pressure to the minimum users need.

  • Use a master controller to sequence compressors.

  • Replace wasteful uses with blowers or other equipment.

  • Recover heat from compressors for process or water heating where possible.

Industrial plant

Large compressor stations

  • Match compressor type to load: turbo compressors for large base loads, screw compressors for variable trim duty; see turbo compressors.

  • Keep intercoolers and inlet filters clean; see intercoolers.

  • Minimise blow-off on turbo compressors with good control.

  • Track energy per cubic metre of air each month.

IHI from BTGC

IHI Corporation of Japan makes turbo compressors for plant air and air separation and oil-free screw compressors for process gas. BTGC is the IHI partner in Saudi Arabia. See also instrument air quality and the rotating equipment page.

Questions buyers ask

How much can a leak survey save? Often a significant share of compressed air energy, depending on how leaky the system is.

Does lowering pressure really save energy? Yes, compressors use less power at lower discharge pressure.

Can BTGC help audit our system? Yes, with measurement and recommendations.

Contact BTGC

Email info@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.