Crusher Rebuilds: Repair, Upgrade or Replace an Older Crusher

18.11.26 01:03 PM

In short: crusher frames often outlive several sets of rotors, bearings and wear parts. A planned rebuild can restore an older hammermill, impactor or roll crusher for much less than a new machine, and an upgrade can add capacity or safety features at the same time. Replacement makes sense when the frame is cracked, spares are no longer available or the process has changed. BTGC supplies ASTEC and TerraSource crushers, wear parts and rebuild support.

TerraSource crushers and feeders

Cement plants, phosphate operations, power stations and quarries in the Kingdom run crushers that may be decades old. An unplanned failure of one of these machines stops the whole line.

Inspect before deciding

ItemWhat to check
Frame and housingCracks, distortion, worn liner seats and bolt holes
Rotor or rollsShaft run-out, disc wear, pin holes and balance
Bearings and housingsFits, temperature history and lubrication condition
Grates, breaker plates and linersWear patterns that point to feed or setting problems
Drive trainCouplings, belts, motor and gearbox condition
Capacity and product sizeCompare with what the plant needs today

Rebuild, upgrade or replace

  • Rebuild when the frame is sound and the duty is unchanged: renew rotor parts, bearings, liners and seals to the original specification.

  • Upgrade during the rebuild with hydraulic opening, better wear materials, improved tramp metal protection or a new rotor design.

  • Replace when the frame is damaged or the required capacity or product size is outside the machine's range.

  • Where parts are obsolete, they can often be reverse engineered; see asset cataloging and re-engineering.

Crushing plant and conveyors at a Saudi mine

Planning the work

  • Survey the machine during a planned stop and order long-lead parts before the rebuild shutdown.

  • Measure and record clearances, shaft fits and settings for future reference.

  • Check rotor balance after the rebuild and log vibration on restart.

  • Review wear materials; see crusher wear parts and rotor, bearing and drive care.

ASTEC from BTGC

ASTEC Industries owns TerraSource Global and its Pennsylvania Crusher, Gundlach and Jeffrey Rader brands. BTGC supplies ASTEC and TerraSource equipment in Saudi Arabia with wear parts and rebuild support for installed machines. See also crusher selection and the mining and material handling page.

Questions buyers ask

How long does a crusher rebuild take? It depends on scope and parts; ordering parts before the shutdown shortens it a lot.

Can an older crusher be rebuilt if drawings are missing? Often yes, by measuring the machine and its worn parts; send BTGC the details for review.

Is a rebuilt crusher as reliable as a new one? A rebuild with new rotating parts on a sound frame can give long service.

Contact BTGC

Email info@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.