In short: bucket teeth, drill bits, bolts and liner pieces often end up in the crusher feed. In a roll crusher or hammermill one piece of tramp metal can break rolls, hammers, grates or shafts. Protection works in layers: magnets and metal detectors remove or flag metal on the feed conveyor, and the crusher itself uses hydraulic relief, spring release or shear pins to survive what still gets through. BTGC supplies ASTEC and TerraSource crushers and parts.

Quarries, cement plants, phosphate mines and coal and petcoke handling sites in the Kingdom all see tramp metal in their feed.
Layers of protection
| Device | Role |
|---|---|
| Suspended or overband magnet | Lifts ferrous metal off the conveyor |
| Metal detector | Detects ferrous and non-ferrous metal and stops or diverts the belt |
| Diverter or reject chute | Sends contaminated material away from the crusher |
| Crusher relief system | Hydraulic or spring release lets metal pass through the crusher |
| Shear pins or couplings | Break before expensive parts do |
Making it work
Place magnets and detectors far enough ahead of the crusher for the belt to stop in time.
Set detector sensitivity to the smallest damaging metal, not to every nail.
Test detectors regularly with a standard test piece.
Keep magnets clean so they keep their strength.
Train operators to remove metal and record each event.

After metal gets through
Inspect rolls, hammers, grates and bearings before restart.
Find where the metal came from, such as worn bucket teeth or liners, and fix the source.
Replace shear pins only with the correct grade.
Review wear parts and rotor condition; see rotor and drive care.
ASTEC from BTGC
ASTEC Industries owns TerraSource Global and its Pennsylvania Crusher, Gundlach and Jeffrey Rader brands. BTGC supplies ASTEC and TerraSource in Saudi Arabia with wear parts and rebuild support. See also feeders, crusher rebuilds and the mining and material handling page.
Questions buyers ask
Will a magnet catch all tramp metal? No, it misses non-ferrous and manganese steel parts; a metal detector covers these.
Do roll crushers have tramp relief? Many designs have hydraulic or spring relief; check your machine.
Can relief be added to an older crusher? Sometimes, as part of a rebuild or upgrade.
Contact BTGC
Email info@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.