In short: power plants, petrochemical complexes and fertiliser plants need very pure, demineralised water for boilers and processes. Ion exchange units and polishing systems switch between service and regeneration, using hydrochloric or sulphuric acid and caustic soda. The many automatic valves in these units must handle corrosive chemicals and resin beads, operate thousands of times and never leak into the pure water. Lined diaphragm valves with suitable diaphragms are the standard choice. BTGC supplies Saunders industrial diaphragm valves.

Boiler feedwater quality in Saudi power and industrial plants depends on reliable demineralisation, often starting from desalinated water. Valve leaks in regeneration lines can contaminate treated water or waste chemicals.
Valve duties in a demin plant
| Duty | Requirement |
|---|---|
| Service inlet and outlet | Tight shutoff to protect treated water quality |
| Acid and caustic regeneration | Corrosion resistance and chemical-compatible diaphragms |
| Backwash and rinse | Handle resin fines without damage |
| Frequent cycling | Reliable automatic operation over many cycles |
Selection points
Rubber or fluoropolymer-lined bodies suited to each chemical; see chemical dosing valves.
Diaphragm materials matched to acid, caustic and temperature.
Pneumatic actuators with position feedback for automatic sequences.
Resin traps or strainers to keep resin out of valves.
Consistent valve types across the plant to simplify spares.

Maintenance tips
Replace diaphragms on a schedule based on cycles and chemical exposure.
Check actuator air supply and limit switch signals during regeneration.
Inspect linings for damage when valves are removed.
Track water quality after regeneration to detect leaking valves.
Keep spare diaphragms and actuator kits on site.
Saunders from BTGC
Saunders, part of Crane ChemPharma and Energy, makes industrial and hygienic diaphragm valves. BTGC is the Saunders partner in Saudi Arabia. See also hygienic diaphragm valves and the power and utilities sector page.
Questions buyers ask
Why diaphragm valves in demin plants? They isolate chemicals from the valve mechanism, resist corrosion with linings and suit automatic cycling.
How often should diaphragms be changed? Based on cycle counts and inspection; many plants change them at planned intervals.
Does BTGC supply actuated diaphragm valves? Yes, with pneumatic actuators and position feedback.
Contact the BTGC valve team
Email valves@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.