Fuel Oil Supply Systems for Boilers, Heaters and Diesel Engines

17.11.26 04:26 PM

In short: boilers, process heaters, standby generators and diesel engines that burn liquid fuel need a supply system that delivers clean fuel at the right pressure and viscosity. Heavy fuel oil must be heated to reach burner or injector viscosity, filtered to protect equipment, and pumped steadily. Screw and gear pumps, heaters, filters and viscosity control work together. When they fail, burners trip and engines lose power. BTGC supplies Arai screw and rotary plunger pumps.

Oil handling facility

Power plants, industrial boilers, desalination plants and standby generator sets in the Kingdom still use liquid fuels in many places. Fuel system problems are a frequent cause of trips and poor combustion.

Main components

ComponentRole
Transfer pumpsMove fuel from storage to day tanks
Supply and booster pumpsDeliver fuel at the required pressure, often screw pumps
HeatersBring heavy fuel to the right viscosity
Filters and strainersProtect pumps, burners and injectors
Viscosity controlAdjusts heating to keep viscosity steady
Return and recirculation linesMaintain temperature and pressure

Design and operating points

  • Size pumps for the highest viscosity case, including cold starts.

  • Use duty and standby pumps with automatic changeover for critical burners.

  • Keep suction lines short and heated where needed.

  • Fit relief valves on positive displacement pumps; see PD pumps.

  • Separate water from fuel in tanks and drain regularly.

Industrial power plant

Maintenance tips

  • Clean strainers and change filters on differential pressure.

  • Check pump wear by trending flow and pressure.

  • Verify heater performance and temperature controls.

  • Test standby pump changeover regularly.

  • Take fuel samples for water, sediment and viscosity.

Arai Pump from BTGC

Arai Pump Mfg. Co., Ltd. of Japan makes screw pumps and rotary plunger pumps for fuel, lube oil and viscous fluids. BTGC is the Arai Pump partner in Saudi Arabia. See also lube oil systems and the power and utilities sector page.

Questions buyers ask

Why must heavy fuel oil be heated? To lower its viscosity so it can be pumped, filtered and atomised properly.

Screw or gear pump for fuel oil? Screw pumps give smooth, quiet flow and long life; gear pumps suit smaller systems.

Does BTGC supply replacement fuel pumps? Yes, Arai pumps and spare parts.

Contact BTGC

Email info@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.