In short: gas transmission pipelines carry large volumes at high pressure across long distances, with block valve stations at intervals to isolate sections in an emergency or for maintenance. These valves must be full bore so pipeline pigs can pass, often buried with welded bodies and extended stems, and fitted with actuators that close automatically when a line break is detected. Getting the specification right ensures they work after years without operation. BTGC supplies KPC pipeline ball and gate valves.

The Kingdom's master gas system and new gas pipelines link fields, gas plants, power stations and industrial cities. Mainline block valves and station valves are critical to safety and to keeping gas flowing.
Key features of mainline valves
Full-bore trunnion-mounted ball valves or through-conduit gate valves so pigs pass without obstruction; see trunnion ball valves for pipelines.
Fully welded bodies for buried service, removing body joints that could leak.
Stem extensions with vent, drain and sealant lines brought to the surface.
Coatings and cathodic protection compatibility for buried valves.
Design and testing to API 6D, with owner supplementary requirements.
Actuation and line break protection
| Item | Notes |
|---|---|
| Gas-over-oil actuators | Use pipeline gas as the power source, useful at remote sites without utilities |
| Electric or electro-hydraulic actuators | Where reliable power is available, with fail-safe options |
| Line break detection | Closes the valve when pressure falls too fast, signalling a rupture |
| Remote control and monitoring | Valve position and pressure sent to the pipeline control centre |

Maintenance for valves that rarely move
Partially stroke or fully cycle valves on a schedule where operations allow.
Check sealant injection fittings and inject sealant if seat leakage appears.
Test line break settings and actuator function regularly.
Inspect coatings and cathodic protection at valve stations.
Keep records of every operation, test and repair.
KPC from BTGC
KPC Corporation of Korea supplies trunnion-mounted ball valves up to 60 inch, through-conduit slab and expanding gate valves and subsea valves for oil and gas transmission. BTGC is the KPC partner in Saudi Arabia. See also Saudi-made pipeline valves, actuator sizing and the oil and gas sector page.
Questions buyers ask
Why must pipeline valves be full bore? So cleaning and inspection pigs can pass through without damage or getting stuck.
Can buried valves be maintained? Through the stem extension, sealant and vent lines; the body itself is welded into the line.
Does BTGC supply valves with actuators fitted? Yes, complete with gas-over-oil or electric actuators and line break systems.
Contact the BTGC valve team
Email valves@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.