Gear Units for Conveyors and Bucket Elevators: Selection, Backstops and Upkeep

17.11.26 02:20 PM

In short: belt conveyors and bucket elevators move material all day in mines, cement plants, ports and fertiliser plants, and their gear units carry high torque at low speed for years. Selection must cover the real load, starting torque, service factor and thermal capacity, and inclined conveyors and elevators need a backstop to stop reverse running when power is lost. Correct mounting, cooling and lubrication keep them reliable in hot, dusty sites. BTGC supplies Hansen industrial gear units.

Industrial gears and bearings

Conveyors in the Kingdom often run in high ambient temperatures, which can push gear units beyond their thermal limits even when mechanical ratings are fine.

Selection points

ItemWhat to check
Mechanical ratingGear unit torque rating with a service factor for load type and duty hours
Thermal ratingAbility to reject heat at the real ambient; add fans or coolers if needed
Starting torquePeak torque at start, especially with direct-on-line motors
BackstopRequired on inclined conveyors and bucket elevators to prevent runback
MountingFoot, shaft-mounted with torque arm, or swing base arrangements

Backstops and safety

  • Backstops hold the load when the drive stops; size them for the full runback torque.

  • On multi-drive conveyors, share backstop duty correctly between drives.

  • Check backstop function during planned stops.

  • Use holdbacks and brakes as specified by the conveyor designer.

Mining conveyor

Maintenance tips

  • Use the specified oil grade and change intervals; synthetic oils help in high heat; see synthetic gear oil.

  • Take oil samples for wear metals and contamination.

  • Keep cooling fans and fins clean.

  • Check alignment of motor, coupling and gear unit after any work.

  • Trend vibration and temperature to catch bearing or gear problems early.

Hansen from BTGC

Hansen Industrial Transmissions of Belgium, part of the Sumitomo Drive Technologies group, makes industrial gear units for conveyors, elevators, mixers and cooling towers. BTGC is the Hansen partner in Saudi Arabia. See also cooling tower gearboxes, drives for mining conveyors and the machinery handling page.

Questions buyers ask

Why does my conveyor gearbox run hot in summer? Its thermal rating may be too low for the ambient; fans, coolers or synthetic oil can help.

Does every conveyor need a backstop? Inclined conveyors and elevators that could run back under load need one.

Can Hansen units replace other brands? Often yes, with matching dimensions and adapters.

Contact BTGC

Email info@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.