Variable Speed Drives for Mining Conveyors, Crushers and Mills

17.11.26 12:42 PM

In short: mining and minerals plants run long belt conveyors, crushers, mills, pumps and fans under heavy, changing loads. Variable speed drives give controlled starts that protect belts and gearboxes, share load between multiple motors on one conveyor, adjust speed to throughput, and on downhill conveyors can return braking energy to the supply. In dusty, hot sites, drive enclosures and cooling matter as much as the drive itself. BTGC supplies Danfoss VACON low and medium voltage drives.

Danfoss VACON AC drives range

Phosphate, bauxite, gold and limestone operations, cement plants and ports in the Kingdom move material over long conveyors and through heavy crushing and grinding equipment. Starting and stopping these machines is hard on mechanical parts and on the power supply.

Benefits by application

ApplicationWhat the drive brings
Long belt conveyorsSmooth acceleration, lower belt tension, load sharing between head and tail drives
Downhill or regenerative conveyorsControlled braking with energy returned to the grid through active front end drives
CrushersHigh starting torque, overload handling, speed matched to feed
Mills and kilnsControlled starts, inching and positioning for maintenance
Slurry pumps and fansEnergy savings and process control at variable flow; see VFDs for pumps and fans

Design points

  • Size drives for the real starting torque and overload profile, not only the motor rating.

  • Use master-follower control to share load on multi-drive conveyors.

  • Plan harmonic mitigation, often with active front end or low harmonic drives, for weak site grids.

  • Use inverter-duty motors and protect bearings from shaft currents; see VFD bearing currents.

  • Install drives in cooled, sealed rooms or enclosures; see enclosure cooling.

Mining crusher and conveyor

Maintenance tips

  • Keep heat sinks, filters and cooling fans clean; dust is the most common cause of drive overheating.

  • Check DC bus capacitors and cooling fans on a schedule based on running hours.

  • Back up drive parameters and keep spare control boards for critical drives.

  • Trend drive temperatures and fault logs to spot problems early.

Danfoss VACON from BTGC

Danfoss Drives supplies VACON and VLT low and medium voltage AC drives for conveyors, crushers, mills, pumps and fans. BTGC is the Danfoss VACON partner in Saudi Arabia. See also gear units for shock loads and the mining and metals sector page.

Questions buyers ask

Can a drive replace a fluid coupling on a conveyor? Often yes, giving better control and energy savings; check torque and thermal limits first.

What is an active front end? A drive input stage that draws near-sinusoidal current and can return braking energy to the supply.

Does BTGC support drive commissioning? Yes, with Danfoss and BTGC engineers.

Contact the BTGC power division

Email power@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.