In short: a gearmotor is sized on the torque the driven machine really needs, multiplied by a service factor for shock, running hours and starts per hour. It must also pass two more checks: thermal capacity, so it does not overheat in hot rooms, and the overhung or thrust load on the output shaft from chains, belts or mixer impellers. Missing any of these shortens life. BTGC supplies Sumitomo Cyclo drives and gearmotors.

Conveyors, feeders, thickeners, mixers and screens in Saudi plants run long hours at high ambient temperatures.
Sizing steps
| Step | What to check |
|---|---|
| Load torque and speed | From the machine data, not only the motor nameplate |
| Service factor | Load type (uniform, moderate or heavy shock), hours per day, starts per hour |
| Thermal capacity | Ambient temperature, duty cycle and ventilation |
| Overhung and thrust load | Sprocket, pulley or impeller forces at the output shaft |
| Mounting and shaft | Foot, flange or shaft mounting; hollow or solid shaft |
| Motor | Voltage, frequency, enclosure and inverter duty if speed controlled |
Common mistakes
Sizing on motor power alone, so the reducer is too small for peak torque.
Ignoring frequent starts or reversing, which call for a higher service factor.
Forgetting that high ambient temperature reduces thermal capacity.
Mounting sprockets far out on the shaft, which raises the overhung load.
Using an oil viscosity that does not suit the ambient.

Shock loads and Cyclo drives
Cycloidal drives share load across many pins and rollers, which helps with shock; see cycloidal reducers for shock loads.
For shaft-mounted units, check torque arms; see shaft-mounted reducers.
Variable speed drives give softer starts and less shock.
Sumitomo Drive from BTGC
Sumitomo Drive Technologies makes Cyclo drives and gearmotors. BTGC supplies Sumitomo Drive in Saudi Arabia with replacement units and parts. See also gearmotors for water treatment and the mining and material handling page.
Questions buyers ask
What service factor should I use? Use the manufacturer's tables for the load type and running hours; heavy shock and many starts need higher factors.
Can a gearmotor be replaced with another make? Yes, if torque, speed, mounting dimensions and shaft details match; send the nameplate to BTGC.
Does heat affect gearmotor rating? Yes, high ambient temperature reduces thermal capacity and oil life.
Contact BTGC
Email info@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.