Shaft-Mounted Reducers: Hollow Shafts, Torque Arms and Installation

18.11.26 08:19 AM

In short: a shaft-mounted reducer slides its hollow output shaft directly onto the driven shaft, such as a conveyor pulley or mixer shaft, and a torque arm stops the housing from rotating. This removes the need for a separate base and output coupling and saves space and alignment work. Most problems come from poor shaft fits, missing anti-seize, badly placed torque arms or missing backstops on inclined conveyors. BTGC supplies Sumitomo gear units and gearmotors with hollow shaft and shaft-mounted options.

Sumitomo gearmotors

Conveyors, bucket elevators, screw conveyors, mixers and agitators across mines, cement plants and water treatment works in the Kingdom use shaft-mounted drives.

Connection options

OptionNotes
Keyed hollow shaftSimple and common; needs correct fit and anti-seize
Shrink discKeyless clamp; good for shock loads and easier removal
Taper bushingsAllow some variation in driven shaft size
Splined shaftsUsed on some heavy duties

Torque arm and backstop points

  • Mount the torque arm as recommended, usually at right angles to the line from shaft centre to arm end.

  • Allow the arm a little flexibility so it does not load the bearings.

  • Fit backstops on inclined conveyors to stop runback.

  • Check torque arm fixings for wear and cracks.

  • Do not weld to the reducer housing.

Conveyor drive area

Installation and removal

  • Check driven shaft tolerance, straightness and surface condition.

  • Apply anti-seize to keyed shafts to make future removal possible.

  • Tighten shrink disc bolts in sequence to the specified torque.

  • Use proper removal tools; heat and hammers damage bearings and seals.

  • Check oil level for the mounting position; see cycloidal reducers.

Sumitomo from BTGC

Sumitomo Drive Technologies makes Cyclo reducers, gearmotors and industrial gear units, and owns Hansen Industrial Transmissions. BTGC is the Sumitomo partner in Saudi Arabia. See also mixer and agitator drives, conveyor gear units and the mining and metals sector page.

Questions buyers ask

What does a torque arm do? It stops the reducer housing from rotating while letting it follow the shaft.

Why do hollow shaft reducers seize on the shaft? Corrosion and fretting between shaft and bore, often from missing anti-seize.

Does BTGC supply shaft-mounted drives? Yes, Sumitomo hollow shaft and shaft-mounted units.

Contact BTGC

Email info@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.