Choosing Greases for Mining and Heavy Equipment

17.11.26 02:11 PM

In short: shovels, loaders, haul trucks, crushers, conveyors and stackers rely on grease for pins, bushings, bearings and slewing rings. The wrong grease washes out, hardens in the heat, cannot be pumped through central lubrication lines, or fails under shock loads, leading to worn pins and failed bearings. The right choice balances base oil viscosity, thickener type, extreme pressure and solid additives, temperature range and pumpability. BTGC supplies Bel-Ray mining and industrial greases.

Mining crusher and conveyor

Mines and quarries in the Kingdom work in high heat, dust and occasional water from dust suppression. Grease that performs well in cooler climates may soften and run out in summer, or harden in central lubrication lines at night.

What to look at in a grease

PropertyWhy it matters
Base oil viscosityHigher viscosity for slow, heavily loaded pins and bearings
Thickener typeLithium complex, calcium sulphonate and others differ in heat and water resistance
Extreme pressure and anti-wear additivesProtect under shock and heavy loads
Solid lubricantsMolybdenum disulphide or graphite help where boundary lubrication occurs
Dropping point and temperature rangeResistance to softening in hot conditions
PumpabilityMust flow through centralised lubrication systems at site temperatures

Good practice

  • Use as few grease types as possible across the fleet to avoid mixing errors.

  • Check compatibility before switching greases; some thickeners do not mix well.

  • Set central lubrication cycles for real operating conditions, not default settings.

  • Keep grease clean: closed containers, clean fittings and filtered pumps.

  • Inspect pins and bushings for dry joints and excess purge.

Heavy bulk handling machine

Measuring results

  • Track pin and bushing wear and bearing failures before and after changes.

  • Monitor grease consumption per machine.

  • Use oil analysis on gearboxes and hydraulics alongside grease programmes.

  • Review supplier test data for heat and water resistance.

Bel-Ray from BTGC

Bel-Ray, a Calumet brand, makes greases, open gear lubricants, wire rope lubricants and food-grade lubricants for mining and heavy industry. BTGC is the Bel-Ray partner in Saudi Arabia alongside Royal Purple. See also open gear lubrication, motor bearing grease and the mining and metals sector page.

Questions buyers ask

Can I use one grease for everything? Fewer greases is better, but heavily loaded pins, high-speed bearings and food areas may need different products.

Why does grease harden in central lines? Some greases are not pumpable at lower temperatures or separate under pressure; choose a pumpable grade.

Does BTGC offer lubrication surveys? Yes, to rationalise products and improve equipment life.

Contact BTGC

Email info@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.