Signalling Devices in Industrial Plants: Beacons, Sounders and Alarm Visibility

17.11.26 04:33 PM

In short: in an emergency, alarms only work if people notice them. Plants are noisy, outdoor areas in the Kingdom are extremely bright, and workers wear hearing protection, so sounders and beacons must be chosen and placed carefully. Sound level above background noise, distinct tones, light output visible in daylight, coverage maps and hazardous area certification all matter. BTGC supplies Pfannenberg sounders, beacons and combined signalling devices.

Pfannenberg electrical products

Refineries, gas plants, power stations, warehouses and factories in the Kingdom rely on audible and visual alarms for fire, gas, evacuation and process warnings. Many sites have gaps where alarms are hard to see or hear.

Key design points

PointGuidance
Sound levelClearly above background noise in each area
TonesDistinct tones for different alarms, consistent across the site
Visual signalsBright enough to be seen in daylight and by people with hearing protection
CoveragePlan devices with coverage maps rather than by guesswork
Hazardous areasCertified devices for the zone and gas group

Practical tips

  • Survey noise levels before designing sounder layout.

  • Use combined sounder and beacon units where people may not hear alarms.

  • Avoid placing beacons where they are hidden by equipment or direct sunlight.

  • Use colours consistently, for example for fire, gas and process alarms.

  • Coordinate with the fire and gas and control systems for alarm logic.

Process plant

Testing and maintenance

  • Test alarms regularly and confirm coverage after layout changes.

  • Check device housings, seals and mountings for damage from heat and dust.

  • Replace devices that have faded lenses or weak output.

  • Record tests and faults in the maintenance system.

Pfannenberg from BTGC

Pfannenberg of Germany makes signalling devices, enclosure cooling units, filter fans and process chillers. BTGC is the Pfannenberg partner in Saudi Arabia. See also enclosure cooling, DC systems for fire and gas and the electrical power systems page.

Questions buyers ask

How loud should an alarm sounder be? Clearly louder than background noise in the area; designers often aim well above it.

Why add beacons to sounders? People wearing hearing protection or in very noisy areas may not hear sounders.

Does BTGC supply hazardous area signals? Yes, Pfannenberg certified sounders and beacons.

Contact the BTGC power division

Email power@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.