Laser Distance Measurement for Crane and Trolley Positioning

18.11.26 07:37 AM

In short: cranes, trolleys, stacker-reclaimers and transfer cars travel long distances where wheel-driven encoders can slip. Laser distance sensors measure position directly against a reflector, without contact, over tens or hundreds of metres. They support automatic positioning, anti-collision and warehouse automation, provided the optics are protected from dust, heat and sunlight and the reflector is kept clean and aligned. BTGC supplies TR Electronic laser distance sensors and encoders.

TR Electronic encoders and position sensors

Steel mills, ports, warehouses, cement plants and bulk terminals in the Kingdom are automating cranes and travelling machines. Accurate absolute position is the first requirement.

Where laser distance sensors are used

ApplicationPurpose
Overhead crane bridge and trolleyAbsolute position for automation and anti-collision
Stacker-reclaimers and ship loadersLong travel positioning
Transfer cars and shuttlesStopping accuracy at stations
Automated warehousesPositioning of storage and retrieval machines
Anti-collisionDistance between cranes on one runway

Selection points

  • Measuring range and accuracy needed at the furthest point.

  • Interface to the control system, such as SSI, PROFINET or EtherNet/IP.

  • Response time for the travel speed.

  • Housing, heating or cooling for the site environment.

  • Safety rating where the signal is part of a safety function; see safety encoders.

Overhead crane

Installation and upkeep

  • Mount sensor and reflector rigidly and align the beam with the travel path.

  • Protect optics from direct sunlight, steam and dust; use cleaning schedules.

  • Keep the beam path clear of moving equipment and people.

  • Check readings against reference points after maintenance.

  • Combine with encoders for redundancy where needed; see absolute and incremental encoders.

TR Electronic from BTGC

TR Electronic of Germany makes rotary and linear encoders, including safety-rated encoders, and absolute positioning systems for heavy industry. BTGC is the TR Electronic partner in Saudi Arabia. See also drives for cranes and hoists and the machinery handling page.

Questions buyers ask

Why use a laser instead of a wheel encoder? A laser measures position directly and does not slip on rails or wheels.

Does dust affect laser sensors? Heavy dust and dirty optics or reflectors can, so cleaning and protection matter.

Does BTGC supply laser sensors? Yes, TR Electronic laser distance sensors and encoders.

Contact BTGC

Email info@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.