Linear Position Sensors for Hydraulic Cylinders in Mills, Presses and Gates

17.11.26 12:44 PM

In short: many heavy machines are positioned by hydraulic cylinders: rolling mill roll gaps, presses, shears, gates, dampers and lifting equipment. A linear position sensor fitted inside the cylinder measures the piston position directly, without contact and without wear, and sends it to the controller. It is the key to accurate automatic gap control in rolling mills and to safe positioning of gates and presses. BTGC supplies TR Electronic linear and rotary position sensors.

TR Electronic rotary and linear encoders

Steel and aluminium rolling mills, forging presses, cement plants, dams and water control structures in the Kingdom rely on precise cylinder positioning. Sensor faults can stop production or cause product to go out of tolerance.

How in-cylinder sensors work

  • A sensor rod sits inside a gun-drilled piston rod, with a position magnet fitted to the piston.

  • The sensor measures the magnet position along the rod without contact.

  • Measurement is absolute: the position is known immediately after power-up.

  • Electronics sit in the cylinder end cap, protected from the outside environment.

Selection points

ItemWhat to check
Stroke length and resolutionMatch the cylinder stroke and the accuracy the process needs
Update rateFast enough for closed-loop control, critical for mill gap control
Pressure ratingThe sensor rod must withstand cylinder pressure, including peaks
InterfaceSSI, analogue, fieldbus or industrial Ethernet to match the controller
EnvironmentTemperature, vibration and shock ratings for mill and press duty
Steel rolling mill

Installation and maintenance tips

  • Coordinate with the cylinder maker on bore, magnet and mounting details.

  • Use shielded cables with proper grounding, away from power cables.

  • Protect connectors from water, scale and oil at the mill stand.

  • Keep spare sensors with saved settings for critical cylinders.

  • Check calibration against mechanical references during roll changes.

TR Electronic from BTGC

TR Electronic of Germany makes linear and rotary encoders and absolute positioning systems for heavy industry. BTGC is the TR Electronic partner in Saudi Arabia. See also absolute and incremental encoders, strip thickness gauges and the metal sector page.

Questions buyers ask

Can a sensor be fitted to an existing cylinder? Often yes, if the piston rod can be bored and the end cap adapted; check with the cylinder maker.

Why is absolute measurement important? The machine knows the position immediately after power-up, without moving to a reference point.

Does BTGC supply replacement sensors for other brands? Yes, TR Electronic sensors can often replace existing units with matching interfaces.

Contact BTGC

Email info@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.