Valves for Loading Racks and Tank Farm Manifolds

18.11.26 02:28 PM

In short: fuel and chemical terminals move several products through shared manifolds to truck and rail loading bays. Every valve that separates two products must seal reliably and prove it, or products mix and loads are rejected. Double block and bleed plug valves give that proof, while automated valves, thermal relief and good metering keep loading safe and accurate. BTGC supplies 3Z plug valves for terminals and tank farms.

3Z double block and bleed plug valves

Distribution terminals, refineries and petrochemical plants in the Kingdom load fuels, solvents and chemicals by truck around the clock.

Valve duties in a terminal

LocationTypical valveKey need
Tank outletGate or DBB plug valve, often fire-safeReliable isolation and fire safety
Product manifoldDBB plug valvesVerified segregation between products
Meter runDBB valves and control valvesAccurate metering and proving
Loading armQuick-closing or automated valvesFast shutdown on overfill or emergency
Blocked-in sectionsThermal relief valvesRelieve pressure as product warms in the sun

Design points

  • Use double block and bleed valves wherever two products meet; see DBB plug valves.

  • Automate manifold valves from the terminal control system; see remote valve control.

  • Provide thermal relief on any line that can be blocked in, since Saudi sun heats pipes fast.

  • Specify fire-safe designs at tank outlets and in bunded areas.

Fuel terminal and tank farm

Operation and upkeep

  • Check body bleeds during line-ups to confirm isolation; see preventing contamination.

  • Keep spare slips and seals for plug valves on critical manifolds.

  • Stroke-test emergency valves at loading bays.

  • Record any contamination events and trace them back to valves.

3Z Valve from BTGC

3Z Corporation of Korea specialises in plug valves, including double block and bleed expanding plug valves and sleeved and lined designs. BTGC supplies 3Z valves in Saudi Arabia with spare parts. See also the oil and gas sector page.

Questions buyers ask

Why not use ball valves on product manifolds? They can work, but DBB plug valves make it easy to prove isolation through the body bleed.

Are thermal relief valves really needed? Yes, blocked-in liquid lines can over-pressurise quickly in the sun.

Does BTGC supply actuated manifold valves? Yes, with electric or pneumatic actuators to suit the terminal.

Contact the BTGC valve team

Email valves@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.