Gate Valves or Ball Valves for Pipelines and Stations

17.11.26 03:14 PM

In short: pipelines and pipeline stations mostly use two types of full-bore isolation valve: trunnion-mounted ball valves and through-conduit slab or expanding gate valves. Both allow pigs to pass and both can give double block and bleed isolation, but they differ in size, weight, operating torque, sealing behaviour and maintenance. Choosing well depends on the service, sizes, solids and how often the valve operates. BTGC supplies ITAG ball valves and pipeline gate valves made in Jubail.

Valves made in Saudi Arabia

Crude, product and gas pipelines, gathering systems and terminals in the Kingdom use both valve types, often by owner preference. Understanding the trade-offs helps when writing specifications and choosing spares.

Comparison

PointTrunnion ball valveThrough-conduit gate valve
OperationQuarter-turn, fastMulti-turn, slower
Face-to-face lengthShorterLonger in some sizes
SealingSpring-loaded seats against the ballGate seals against seats; expanding gates wedge for tight seal
Solids and debrisSeats can be damaged by debrisGate wipes seats; tolerant of some solids
ActuationCompact actuatorsLarger linear or multi-turn actuators
MaintenanceSealant injection, seat repairsSeat and gate lapping, packing

Choosing for the service

  • Frequent operation and fast closure favour ball valves.

  • Dirty or waxy crude and services with solids may favour slab gate valves.

  • Very high pressure classes and large sizes: compare weight, cost and actuator size.

  • Owner standards may fix the choice for mainline and station valves.

  • Consider local manufacturing and spares support; see Saudi-made pipeline valves.

Pipeline and station facility

Maintenance points

  • Grease or sealant injection on schedule where designs allow.

  • Cycle valves during planned windows to keep them free.

  • Check body cavity pressure and relief functions.

  • Inspect seats, balls or gates during overhauls and test after repair.

ITAG from BTGC

ITAG in Jubail manufactures high-pressure trunnion mounted ball valves and pipeline gate valves. BTGC is the ITAG partner in Saudi Arabia. See also trunnion ball valves, gas transmission valves and the oil and gas sector page.

Questions buyers ask

Can both valve types be pigged? Yes, full-bore ball valves and through-conduit gate valves both allow pigs to pass.

Which seals better with dirty fluids? Slab gate valves often cope better with debris because the gate wipes the seats.

Does BTGC stock pipeline valves locally? Yes, through ITAG and BTGC stock in Dammam, Jubail and Yanbu.

Contact the BTGC valve team

Email valves@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.