Pumps for Polymer and Resin Transfer in Petrochemical Plants

18.11.26 03:03 PM

In short: polymers, resins, waxes and additives can be thousands of times more viscous than water and may be sensitive to shear and temperature. Positive displacement pumps such as rotary plunger and screw pumps move them at steady flow regardless of viscosity, while heating jackets keep the product fluid and seals stop leaks of sticky material. BTGC supplies Arai Pump rotary plunger and screw pumps for viscous service.

Polymer and chemical plant reactor area

Polymer and chemical plants in Jubail and Yanbu transfer resins, additives, oligomers and waxes between reactors, tanks and finishing units.

What makes these fluids hard to pump

PropertyEffect
High viscosityLarge suction losses and high power
Temperature sensitivitySolidifies if cooled, degrades if overheated
Shear sensitivitySome products change properties if sheared hard
StickinessSeals and clearances foul quickly

Pump selection

  • Rotary plunger pumps give steady flow and good suction for very viscous products.

  • Screw pumps give low pulsation for transfer and loading.

  • Run slower for higher viscosity to protect suction and limit shear.

  • Size suction lines generously and keep them short.

  • Use metering versions where dosing accuracy matters.

Heated process piping

Heating, seals and operation

  • Jacket pumps and trace lines to keep product within its temperature window.

  • Choose seals or packing suited to sticky, crystallising products, with flush or quench where needed.

  • Never start on cold, solid product; see start-up practice for heated pumps.

  • Fit relief protection on the discharge of positive displacement pumps.

  • For valves on these lines, see valves for polymers.

Arai Pump from BTGC

Arai Pump Mfg. Co., Ltd. of Osaka makes rotary plunger pumps and screw pumps for viscous fluids. BTGC supplies Arai Pump in Saudi Arabia with spare rotors, liners and seals. See also PD pumps for viscous fluids and the petrochemicals sector page.

Questions buyers ask

Why run slower with viscous fluids? To fill the pump fully on suction and limit shear and wear.

Can one pump handle several products? Sometimes, if viscosity and temperature ranges are close and cleaning is planned.

Does BTGC help size pumps? Yes, with viscosity, temperature and flow data.

Contact BTGC

Email info@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.