In short: a sleeved plug valve seals through a PTFE sleeve between plug and body, plus a top seal around the stem. Over time the sleeve wears or creeps and the top seal loosens, so leakage or high torque appear. Most designs allow some adjustment of the top seal in service, and a full overhaul replaces the sleeve and seals with a repair kit. Correct decontamination, assembly and testing make the repaired valve as good as new. BTGC supplies Xomox valves and repair kits.

Chemical, polymer and fertiliser plants in the Kingdom use sleeved plug valves in corrosive and fouling service, where overhaul is often cheaper than replacement.
Signs a valve needs attention
| Sign | Likely cause |
|---|---|
| Leak at the stem | Top seal needs adjustment or replacement |
| Seat leakage | Worn or damaged sleeve |
| High operating torque | Product build-up, swollen sleeve or over-tight adjustment |
| Body leak at the cover | Gasket failure |
Overhaul steps
Isolate, drain and decontaminate the valve following plant procedures.
Remove the cover and plug, then remove the old sleeve.
Clean the body bore and plug, and check for corrosion or damage.
Fit the new sleeve, top seal and gaskets from the repair kit.
Reassemble, adjust to the specified torque and test for shell and seat tightness.

Good practice
Use genuine repair kits matched to the valve size and model.
Do not overtighten adjustment bolts, which raises torque and wears the sleeve.
Record overhaul dates and test results by tag number.
Test to the plant's standard; see seat leakage classes.
For design background, see lubricated or sleeved plug valves and multi-port plug valves.
Xomox from BTGC
Xomox is a Crane brand known for sleeved plug valves and lined plug and ball valves. BTGC supplies Xomox valves in Saudi Arabia with repair kits and spares, and valve testing at the BTGC Jubail service center.
Questions buyers ask
Can a sleeved plug valve be adjusted in service? Many designs allow top seal adjustment within limits; follow the manual.
Is overhaul cheaper than replacement? Often, especially for larger or alloy valves.
Can BTGC test overhauled valves? Yes, at the BTGC Jubail service center.
Contact the BTGC valve team
Email valves@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.