In short: stacker-reclaimers build and recover stockpiles of ore, coal, limestone, phosphate and other bulk materials, and ship loaders put the material into vessels. These are large rail-mounted machines that run around the clock, so their availability sets the throughput of a mine, port or plant. Key design choices are the machine type (combined or separate stacker and reclaimer, bucket wheel, bridge or portal), capacity, boom length and the automation level. BTGC supplies Tenova bulk handling equipment.

Phosphate, bauxite and other mining operations, ports on the Gulf and Red Sea coasts, cement and steel plants in the Kingdom all handle large bulk volumes. Heat and abrasive dust make machine design and maintenance especially important.
Main machine types
| Machine | Typical use |
|---|---|
| Combined bucket wheel stacker-reclaimer | Stockyards where one machine both builds and recovers piles |
| Separate stacker and reclaimer | High-capacity yards where stacking and reclaiming run at the same time |
| Bridge or drum reclaimer | Blending beds for cement, limestone and coal homogenisation |
| Portal or semi-portal scraper reclaimer | Covered stores and circular stockyards |
| Ship loader (travelling, radial or linear) | Loading bulk carriers at port berths |
Design and specification points
Capacity at the actual bulk density and lump size, with peak and average rates.
Boom length, pile geometry and rail span to match the yard layout.
Structural design for wind, temperature and seismic loads at the site.
Dust control: enclosed chutes, water sprays or dust suppression, and cabin filtration for operators.
Automation: GPS or encoder positioning, pile scanning and anti-collision systems for unattended operation.
Electrical: cable reels, slip rings and drives designed for the heat and dust.

Maintenance for high availability
Inspect bucket wheel, buckets and teeth for wear; plan replacements.
Monitor slewing bearing, luffing cylinders and travel drives; take grease and oil samples.
Check structural welds and bolted joints for fatigue cracks on booms and counterweights.
Maintain conveyor belts, idlers and chutes; see bulk material feeders.
Keep position sensors and encoders clean; see absolute and incremental encoders.
Use condition monitoring on main gearboxes and drives; see gear oils for shock loads.
Tenova from BTGC
Tenova (Techint group) supplies bulk material handling equipment, including stacker-reclaimers, ship loaders and unloaders, and systems for mining and metals. BTGC is the Tenova partner in Saudi Arabia. See also the machinery handling page and the mining and metals sector page.
Questions buyers ask
Combined or separate stacker and reclaimer? Combined machines cost less; separate machines allow stacking and reclaiming at the same time for higher capacity.
Can existing machines be automated? Often yes, with positioning, scanning and anti-collision upgrades.
Does BTGC support spare parts? Yes, buckets, teeth, slewing bearings and drive parts through Tenova and BTGC stock.
Contact BTGC
Email info@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.