Valves for Sulphur Recovery Units and Molten Sulphur

17.11.26 04:17 PM

In short: gas plants and refineries remove hydrogen sulphide from gas and recover it as liquid sulphur in sulphur recovery units. Molten sulphur must stay within a narrow temperature window: too cold and it solidifies in valves and lines, too hot and it becomes very viscous. Valves in sulphur service are therefore steam-jacketed, with designs that leave no cold spots or pockets where sulphur can freeze. Jacketed plug valves are a common choice. BTGC supplies Xomox jacketed and sleeved plug valves.

Xomox process valve

The Kingdom produces very large amounts of sulphur from sour gas processing and refining, much of it exported. Sulphur handling lines run continuously and blocked valves can stop sulphur production and force gas plants to cut rates.

Why molten sulphur is difficult

  • Sulphur melts at about 115 to 120 degC and must be kept above this everywhere in the line.

  • Its viscosity rises sharply above about 160 degC, so overheating also causes problems.

  • Dissolved H2S in sulphur is toxic and released when sulphur is agitated or cooled.

  • Solid sulphur builds up in cavities and seats, jamming valves.

Valve features for sulphur service

FeaturePurpose
Full steam jacket on body and bonnetKeeps every wetted surface above the freezing point
Cavity-free design such as sleeved plug valvesNo pockets where sulphur can collect and solidify
Steam-jacketed flanges and connectionsAvoid cold spots at joints
Suitable sealing materialsResist sulphur and H2S at operating temperature
Corrosion-resistant materials where water is presentWet sulphur and sulphur acids attack carbon steel
Gas processing plant

Operation and maintenance

  • Check steam supply, traps and jacket temperatures regularly.

  • Never let jacketed lines cool with sulphur inside; drain or keep heated.

  • Follow H2S safety precautions when opening sulphur equipment.

  • Inspect sleeves and seals at shutdowns and clean out deposits.

  • Keep spare jacketed valves for critical positions.

Xomox from BTGC

Xomox, part of Crane ChemPharma and Energy, supplies sleeved and jacketed plug valves, lined valves and high-performance butterfly valves. BTGC is the Xomox partner in Saudi Arabia. See also sour service valves, lubricated and sleeved plug valves and the oil and gas sector page.

Questions buyers ask

Why do sulphur valves need steam jackets? To keep sulphur above its freezing point everywhere inside the valve.

What happens if sulphur overheats? Above about 160 degC it becomes very viscous, slowing flow and increasing pressure drop.

Does BTGC supply jacketed valves? Yes, Xomox jacketed plug valves for sulphur service.

Contact the BTGC valve team

Email valves@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.