Valves for Sulphuric and Phosphoric Acid Plants

17.11.26 02:04 PM

In short: phosphate fertiliser complexes make large quantities of sulphuric acid and use it to produce phosphoric acid. Both acids attack ordinary steels, and their corrosiveness changes sharply with concentration, temperature and impurities. Valves in these plants are usually fluoropolymer-lined plug, ball or butterfly valves, or are made from carefully chosen alloys for hot, strong acid. Getting the material right, and handling acid lines safely during maintenance, prevents leaks that are dangerous to people and equipment. BTGC supplies Xomox lined plug and ball valves.

Xomox valve with actuator

Phosphate processing in the Kingdom combines sulphuric acid plants, phosphoric acid plants and fertiliser granulation on large integrated sites. Valve failures in acid service cause shutdowns and serious safety incidents.

How the acids behave

  • Concentrated sulphuric acid at moderate temperature can be handled in carbon steel in some cases, but dilute or hot acid attacks it quickly.

  • Corrosion rises sharply where acid is diluted, for example at mixing points and where moisture enters.

  • Phosphoric acid from the wet process contains fluorides, chlorides and solids that make it more corrosive and abrasive.

  • Velocity and turbulence increase attack, especially at valve seats and outlets.

Valve options

OptionTypical use
PTFE or PFA lined plug valvesGeneral acid isolation; no cavity where acid collects
Lined ball and butterfly valvesIsolation and throttling at moderate temperature and pressure
High-alloy or special stainless valvesHot, concentrated acid where linings reach their temperature limit
Valves with flushing connectionsPhosphoric acid slurry lines that can scale or plug
Chemical process plant

Specification and safety points

  • Give full acid data: concentration, temperature, impurities, solids and any upset conditions.

  • Check lining temperature and vacuum ratings, and permeation resistance for the service.

  • Use suitable stem seals and gaskets compatible with the acid.

  • Drain, flush and neutralise before opening any acid valve, and use proper protective equipment.

  • Inspect linings for blistering and cracks at each removal, and spark-test where appropriate.

Xomox from BTGC

Xomox, part of Crane ChemPharma and Energy, supplies sleeved plug valves, lined plug and ball valves and high-performance butterfly valves for chemical plants. BTGC is the Xomox partner in Saudi Arabia. See also valves for chlorine and hydrochloric acid, high-performance butterfly valves and the mining and metals sector page.

Questions buyers ask

Can carbon steel valves be used in sulphuric acid? Only in limited cases with concentrated acid at low velocity and temperature; lined or alloy valves are safer choices.

What limits lined valves? Temperature, pressure and vacuum ratings of the lining, and permeation in some services.

Can BTGC test lined valves? Yes, at the Jubail service center, including pressure testing.

Contact the BTGC valve team

Email valves@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.